Problem with connecting two routers

[Dumbledore]

hi guys,

i just bought a buffalo whr-54gs router and flashed it with tomato firmware. everything works fine but when i connect my netgear rt315 gateway router to the buffalo i can't get on the internet with the computers attached to the netgear?

currently i have the netgear connected buffalo's ethernet port 4. things i have tried:

connecting the netgear directly as a stand alone to the dsl modem and everythign works fine. but doesn't work when i connect it to the buffalo.

also, i had a belkin router i used before the buffalo and i tried reconnecting it and everything works fine too.

does anyone have any ideas, thanks!!

 

[Dumbledore]

also, when i connect to the netgear's interface, there is no WAN ip address.



--------------------------------------------------------------------------------

System Name : netgear_rt314
Firmware Version: V3.25(CA.0) | 5/4/2001


WAN Port :
IP Address : 0.0.0.0 DHCP : Client
IP Subnet Mask : 0.0.0.0

LAN Port :
IP Address : 192.168.0.1 DHCP : Server
IP Subnet Mask : 255.255.255.0

 

[JackMDS]

Nergear has to go the Buffalo both using Regular ports.

Netgear IP needs to be with the same subnet, and DHCO disable.

Principle here, http://www.ezlan.net/router_AP.html

 

[Dumbledore]

thanks jack!!