Posting my issues with MrNaturals BIOS for the TH7II

[Acanthus]

Rambus Voltage seems to hang about .2v below normal (2.5v no wire mod)

CPU voltage is all screwy, when set to default (1.5v)i get 1.3v (amazed it posts that low), when set to 1.85v (one of the added features of this bios) its only 1.7v.

Cold Boot issues, will post and boot into Win2kpro, then restart while loading, and then load properly. Restarting from windows or using Ctrl+Alt+Del boots properly every time, this is an issue with powering up from shut down.

 

[Acanthus]

switched to abits new bios (released last week) all kinks worked out but still nothing over 1.7v for the cpu. Is there a bios that actually allows 1.85v??

 

[zzzz]

you have to do the wire trick to get voltage above 1.7V reliably. It is not very hard to do. Read the thread in cpu and overclocking forum started by THUGSROOK

 

[PowerEngineer]

It's my understanding that voltages run lower than set in the BIOS for all versions of TH7II BIOS (and I gather some others as well), so you might consider changing the title of this thread. It isn't really an issue with Mr Natural's overclocking-enhanced version of the TH7II BIOS.

 

[Acanthus]

Mrnaturals bios has this issue and the now one runs dead on. Maybe this is the 1st bios to fix it though, im not sure.