Post your Ti200 speeds

Toggle sidebar Toggle sidebar
Y

Yoshi64

Senior member
Apr 9, 2000
201
0
0
I got a Leadtek GF3 Ti200 OEM yesterday. It came without a fan and no RAM-sinks, 4 ns RAM. It ran blazning hot in stock speeds. But I put a 80mm Sunon-fan blowing right at the heatsink and memory, and now the heatsink is barely warm, even when running 220/500 !
I haven't tried any more yet, but I think I can go a bit higher. I get 5022 in 3dmark 2001 default benchmark, and that is with a P3 @ 744.
 
V

Vampirrella

Golden Member
Apr 5, 2001
1,211
0
71
PNY GF3 Ti200 and i got it up to 220/500 with that coolbits util then tried the geforce util thats a bit diffrent and got a whopping 240/550 so far..
====================
my system is a 1.33ghz thunderbird o/c @ 1.5ghz (actually 1.5666 so it says)

ran 3dmark2001 3 times and got the following: 6701, 6697, and 6705

ran 3dmark2000 3 times and got 8133, 8124 and 8131
====================

whats amazing is the 1500+ points diffrence between the 2 programs.. is this realistic?!
 
B

busterG

Member
Nov 1, 2001
76
0
0
MSI Starforce 220/530 for a single pass on 3dmark2001 then i guess the ram gets too hot and it wont run another for a while and i have to clock it down to 520. 7583 on a 1.4 ghz athlon
 
J

JvD

Member
May 29, 2000
142
0
0
OK, I get my Creative on monday and i have seen (my theory) that the MSI ti200 probably is the same as Creatives ti200. I have seen some posts on Creatives and it seem to be able to run mem @ 510-575. Wonder what ram brand it is?
 
J

jcmkk

Golden Member
Jun 22, 2001
1,159
0
0
Creative still makes video cards, I thought that they were abondoning the market.
<<Edit>> I just checked their website and they don't have any GeForce 3s listed. Are you sure it is a Creative card?
 
Y

Yoshi64

Senior member
Apr 9, 2000
201
0
0
Well, after doing some more testing I settled for 220/520 on my Leadtek Ti200.
I think that is quite a good overclock....
 
G

ginfest

Golden Member
Feb 22, 2000
1,927
3
81
Got my PNY (actually shows as made by MSI if you check the video bios, MSI 8851) 200/460 out of the box. I have ran it up to 220/500 and 3D Mark 2001, Q3, RTCW, Max Payne, NHL 2002 and Madden 2002 all run fine. Also no probs with AvP2 or Commanche, but Ghost Recon has flashing textures (white flashes intermittant in diff parts of the screen) playing at any higher mem than 465?
Also, FWIW, Artifact Tester shows 0 artifacts, both "intense" level DX7 test and all the software tests.
Can't figure why all the above show no lockups or degradation, except GR?
Due to this, I'm not sure if it's safe to run at 220/500, if I should run at 220/500 and just reduce mem for GR?
Case temp at 25C, 20C ambient, stock hs and mem sinks(they seem well attached) and a 2-80mm fan "Card Cooler" blowing on the AGP/PCI slot area.

EDIT for Operation Flashpoint also runs for hours at 220/500.
 
D

dabhpr

Member
Jun 18, 2001
26
0
0
Visiontek GF3 Ti200, bought for $99 at Best Buy's after-Thanksgiving sale...

Currently clocked at 255/555.

I have replaced the wimpy stock fan with a Top-Motor 50mmX20mm thick, 19+ CFM fan, for better cooling, but the card reached these stats with the stock fan...

This card ROCKS.
 
D

darth maul

Platinum Member
Oct 11, 1999
2,392
0
76
My $99 best buy visiontek is at 220/541, at 550 there is tearing...and I never really tried to go high on the core then 220.
 
T

The Reaper

Senior member
Oct 25, 1999
426
0
0
Gainward Ti450 GS @ 240/500 stock cooling, haven't tried higher yet. Nice for $170! With a 1.2 TB = 5952 3dmark2001 :|
 
D

Davegod

Platinum Member
Nov 26, 2001
2,874
0
76
i have a creative GF3ti200, 3DMark2001 gave me 6187, thats on a AMD XP 1600+ with 512mb cl2.5 DDR.... seems a bit pants, anything i might have dont wrong/not done?

ps. also should i always use drivers from creative or just get NVidia's ones? currently im just using the ones that came with the card but its just out here so those should be pretty new right now.

[edit: nothing overclocked]
 
J

JvD

Member
May 29, 2000
142
0
0


<< i have a creative GF3ti200, 3DMark2001 gave me 6187, thats on a AMD XP 1600+ with 512mb cl2.5 DDR.... seems a bit pants, anything i might have dont wrong/not done?

ps. also should i always use drivers from creative or just get NVidia's ones? currently im just using the ones that came with the card but its just out here so those should be pretty new right now.

[edit: nothing overclocked] >>


How much can you OC?
Try Nvidias drivers instead.
 
O

ohn

Junior Member
Feb 22, 2000
3
0
0
Yoshi64, how did you get the OEM-edition of the Leadtek GF3 Ti200?
I checked out Leadtek's website (www.leadtek.com.tw/www.leadtek.co.uk), and as far as I can see, all of the Leadtek GF3 cards comes with a fan attached to the GPU.

A silent Geforce3 Ti200, now that's definitively something I would like to have!
 
U

Uclagamer_99

Platinum Member
Jul 28, 2000
2,867
1
76
I have a 4401 Visiontek Ti200 from BB @ 200/460 Athlon XP 1800+ 512DDR
AMD 760 Chipset

7111 3dmarks :D

i could go higher...but my computer would reboot if i left it looping the benchmark overnight
 
D

Demonicon

Senior member
Oct 30, 2001
570
0
0
I leave my card at speeds that don't show any flaws at all, I could go well into the 500's mem before I hard lock, but what's the point if at a lower speed you get little anomalies on your screen.
 
J

jshrieve

Member
Nov 14, 2001
112
0
0
$99 VisionTek, goes to 245/525mhz rock stable no artifacts, except for occasionally in Ghost Recon. Bringing mem down to 521mhz makes Ghost Recon perfect.

Unfortunately, there's some sort of incompatibility between my monitor and VisionTek cards, causes wavy lines. Card works perfect in all my other computers and my friend's, even tried his identical card in my comp on my monitor.. same monitor crap.

So I'm gonna have to return it. =( Hopefully my Gainward GS will do as well (it's in the mail).
 
D

dshodson

Senior member
Nov 2, 2001
484
0
71
i also got in on the bbuy deal but just put the card in
what is the best tool to overclock it
and what are the best tools to look for artifacts
and finally how do u get fps in quake3 and other games
ut at least gives u a drop down menu

D
 
K

KouklatheCat

Golden Member
Oct 23, 2000
1,502
0
0
Where did you get a Leadtek GF3 Ti200 without a fan and ramsinks? I thought that monster HSF combo was one of Leadtek's selling points.
 
You must log in or register to reply here.

TRENDING THREADS

COMPANY
RESOURCES
FOLLOW
Top Bottom