Post your temp log!!

[lupin]

First, you need to have MBM5 installed. Then you can set MBM5 to keep log of the sensor readings. In my case, I specify it to create the log in HTML format. In addition to that, there are a couple other settings that you can specify:

This is the settings that I have:

General tab:
The interval with which MBM 5 should work: 2 seconds.

High/Low tab, under settings tab:
Interval time for high/low log writing: 1800 seconds (30 mins)
Maximum high/low entries in log: 1 entries

and finally, you can adjust which sensor(s) you want to display. Sensors displayed on mine:

Motherboard Temp
CPU Temp
CPU Voltage
3.3 volts
5.00 volts
12 volts
-12 volts
-5 volts
Fan 1 speed

anyway, check it out here, and don't forget to post yours too.

MBM Log

 

[Spoooon]

No matter what I do, any temp monitoring prog stops working after 5-15 minutes. 🙁 I've learned to deal with it. 😉

edit: I guess I'll try a 5 minute log.

 

[Spoooon]

I didn't do anything fun like RC5. Just the Forums and Winamp.

Log

edit: Note, these are calibrated temps, as per here.