• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

POST codes after GTX970 install

C

cbrriderr

Junior Member
So i update my GPU from a 680 to the gigabyte Geforce GTX970 G1. when I power up i got a bunch of post codes; here are the codes and what they mean from EVGA MB manual. this is where I am stuck I do not know how to proceed or what to do. also the power cable I have 2 8 pin pci and the new gtx 970 has 1 8 pin and 1 6 pin socket. when i plug in i get the EVGA logo and initial screen and then MB starts to beep and reset to blank screen. please help me
26 Clock Gen Init onboard clock generator and sensor
2D Test Video Memory and display Logos
33 Early Keyboard Reset
4D reserved
C1 Base memory detect/memory presence
C3 extended memory-Turn on extended memory, cache initialization
EE=setup pages=E1- Page 1, E2 - Page 2, etc.
here is few images of plugs. and the plugs i got with the ew card, however i cannot plug anywhere in the PSU
 
Last edited:
Uhwa7HhdYaTDepxYA

e1aDTytaCcArAYBP8

vfuZ9jU6euUYg9nY7

w3KZdRMF9ZsrgGzFA


---

Hi,

Welcome to AnandTech Forums. It appears that you attempted to link to images posted on a domain name that is censored on our forums. You are welcome to post them on another image hosting site and edit this post to include your links to those pics.

Thanks for understanding. Sorry for any inconvenience. We hope you enjoy yourself on our forums. 🙂

Harvey
Senior AnandTech Moderator/Administrator
 
Last edited by a moderator:
How are you plugging in the power connectors? Based on what I can see on that card, you should be able to get away with plugging in two 6's versus a 6 and an 8. See if that makes any difference.
 
That's how the 680 was .just 2 6 pin. But on this one 970 if I plug just 2 6. Screen comes on saying
Please power down and connect power supply to video card.
The pci cables come directly from psu internal. They are not clipped in on it. I can't replace them
 
Could be a bad card. Possibly a BIOS reset with the new card installed and connected as required will help.
 
2x8pin= 2x(6+2)pin. Your connectors should be OK. Depends on your PSU - needs to be good quality 500+W.
 
I guess it. Is gamer pc . that some one else put together. Maybe he was going run sli. But I'm giving up . shipping it back today. I found a evga gtx970 has exact same. 2 6 pci connectors as my 680 did. So I just order that now. This 970 g1 Is from gigabyte.
 
Which MB is this ? The older sandy bridge MB (which has pcie 2.0 slots) require firmware update to use a pcie 3.0 card.
-
I had an old msi MB and had to find a beta bios to get a new (r9 390) video card work - was a real hassle.
 
I doubt it has pcie-3 support. THe last bios was 2009; pcie-3 spec was 2010 and actual MB had them afterwards. The bios that 'fixed' my motherboard was released in 2013.
-
Here are the specs:
‰ Triple PCI Express x16 Support
¾ 2 x16 PCI Express 2.0
¾ 1 x16 PCI Express 1.0
¾ Supports 4 GB/sec (8 GB/sec concurrent) bandwidth
https://www.evga.com/support/manuals/files/132-CK-NF79.pdf
--
I would contact evga support at this point and ask them for advice.
-
Quite frankly the dual core is a bit dated at this point and I'm not sure they can fully utilize a 970 (slow cpu).
 
Ya I just talk to evga tech. My mb will only support up to 700 series gpu. I'll need a mb w uefi bios. Like lga775 for 60 bux
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top