Possible to change the AGP divider on the Asus A7V-133...?

[AmazonRasta]

With a 2/3 AGP divider, the AGP bus is 100MHz with a 150MHz FSB. I get beepcodes that the AGP card isn't detected or it has bad memory at 150MHz FSB. So, I'm thinking it's the video card that won't let me post at 150.

Is there a way to change the divider of the AGP bus?

 

[Dulanic]

Nope, no KT133A boards go above 1/2 AGP divider that I know of. The A7V133 uses 2/3 from 100-120 and 1/2 from 121+

 

[AmazonRasta]

In that case then, the AGP bus is only at 75MHz with a 150MHz FSB.

Is 75MHz too high for a Hercules GeForce2 GTS Pro?

 

[CTho9305]

should be fine. my gts (asus) works fine at 88 AGP. you might try raising the drive strength or disabling 4X though...

 

[AmazonRasta]

What do I raise the drive strength to? There are a whole bunch of numbers and letters, and the A7V-133 manual doesn't give any indication of what they mean.

 

[CTho9305]

good question 🙁 Drive strengths are almost completely undocumented. Maybe try F for both, I would assume that is the highest. I really dont know enough to make an informed decision though.