Poll: flashed motherboard

Aug

Junior Member
Oct 6, 2000
1
0
0
Hi all,
Flashed my Abit BE6 motherboard from version PL to version
TH, running a p3 700mhz processor. The computer worked flawlessly with bios version PL but after flashing to
version TH the system after going through the bios initialization hangs up with a black screen with a flashing
"-" on the upper left corner of the screen. The "A" or "C"
drive was never accessed to get into windows 98. I went through the bios setup and set it up the way it was set
up before flash. I thought that the flash was not sucessfully done so I ordered a bios chip with version TH,
I installed the bios chip and have the same problem.
Any suggestions would be appreciated.