Poll: Are you succesful @ running PC-1066?

[fkloster]

Curious who is doin' it and who hasn't been able to do it...

 

[BD231]

I'd like to know as well, great poll!

You should have added a "just want to se the results option" so people without RDRam can see the results

 

[zzzz]

yes, I was able to do it with abit Th7-2 and samsung RDRAM. I traded that system for a laptop last week though..I think everyone who has the right ram(samsung double sided) and right mobo( P4T-E with ICS or Th7-2) should be able to do it. I ran the system also at 150fsb for 2.4ghz and PC900 speed. I wonder what it could have done with PC1200!

 

[Budman]

<< I'd like to know as well, great poll!

You should have added a "just want to se the results option" so people without RDRam can see the results >>

 

[Adul]

show me the results.

 

[fkloster]

Adul, why the long face? Memory is faster than it has ever been

 

[BD231]

Looks like "I just want to see the results..." is in the lead, WooHoo!!!

 

[Windogg]

Gosh darn Intel mobo doesn't allow OCing. Oh well, it was a free system.

Windogg

 

[dexvx]

i can run it at 150Mhz FSB ( 600Mhz DDR Rdram = 1200Mhz RDram) but I have to disable turbo mode on the RDram timer.

The board is an Asus p4t-E with ICS generators, and no modding.

 

[Texmaster]

Is Samsung still the best Rambus?

 

[fkloster]

"i can run it at 150Mhz FSB ( 600Mhz DDR Rdram = 1200Mhz RDram) but I have to disable turbo mode on the RDram timer.

The board is an Asus p4t-E with ICS generators, and no modding. " -devx

If no modding, and assuming you disabled the softmenu and jumped the jumpers on the mobo, how did you up the voltage to run @ 150fsb?

 

[Wolfsraider]

i want to see them thar results also

great poll

and i voted to see the results at least till thursday then i'll post mine crosses fingers

 

[Diable]

I have two 256mb sticks of Corsair RDRAM(Samsung chips)running 140mhz on a P4T-E with ICS clock generators.

 

[ToBeMe]

TH7II-R with 2.4b running 1066 silky smooth.............

 

[Wolfsraider]

yes and available bios for 1.85 sounds good too

 

[Thor86]

1.6@2.14, Asus P4TE (ics clock gens), 2x256 Samsung RDram (from Googlegear) @ 4 x 133 FSB.

Edit: using dip switches to keep my pci/agp within specs. No bios changes no vcore changes.

 

[lastig21]

I wasn't able to get my 2x256meg 16device Samsung Rimms to 1066 speeds. I could run benchmarks for a short time, but it was not stable at those speeds.

 

[dexvx]

those are 16 device 256MB low density Original Samsung Modules.

I dont need to bump the voltage, I had to go through a lot of 256MB modules to finally get a pair that will do 150Mhz FSB.

My P4-1.6a runs at 2.4Ghz default voltage. If it was 1.8a, no way

 

[Thor86]

Devx:

Are you using the dipswitches to set your FSB on your P4T-E? If so , which settings? Thanks.