• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Poll: Abit KT7A Raid..HELP...unreliable boot

F

forkd

Golden Member
I don't know if the problem is the PS or the MOBO.

I turn on power at powerstrip and all is well. I push the pwr button the case and the CD, and HD spin but I get no POST...I get nothing.

If I disconnect the power cable from the back of the case and reinsert it it will boot almost every time. huh?

Any Ideas?

Antec 282 case w/300W PS
Abit KT7A Raid
20 GB WD HD @ 7200rpm
BCD 48X CD rom
Radeon 32MB DDR
Linksys NIC
Creative SB Live Value
 
Try increasing 'I/O voltage' in the BIOS - you may need to raise it to 3.5 or even 3.6 V to get it to boot.

I've had this no boot problem with 2 KT7s - I sent one back, because over the 1 month I had it it just got worse and worse, until it wouldn't boot at all even at 3.6 V.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top