PNY GF3 Ti200 + IWILL KK266 (VIA KT133A) - NO GO

[cvb]

OK, here's the deal. I got my new PNY GF3 Ti200 last night and it seems to work great. However, I started to have this weird problem. My computer wouldn't boot up! I mean, I turn the power on - both CPU and video fans start spinning, CDRW and DVD start blinking (but wouldn't open if I press a button), BUT THE HD doesn't seem to spin. NO GO!

What could be the problem?? Worked great with my ATI Radeon LE, never had a single problem.

AMD Athlon A 1.13
IWILL KK266 (VIA KT133A)
512 PC133 RAM
IBM 75GXP 30 GB (no bad sectors or anything)
300 Watt PS (all voltages are normal, except 4.8V actual where it should be 5V)
PNY GF3 Ti200

 

[Cocytus]

I have the same board and a visiontek GF3 Ti200. No problems here.

You say it worked fine....then this happened a day later?

Unknown, it sucks...BUMP for someone with the answer.

 

[cvb]

The card works great _IF_ I can start the computer No stability issues whatsoever. It usually boots up OK after a long time off, but if you shut it down and try to power it back up - no dice...

It only happens with the PNY, ATI works great :~(( Should I return the card maybe??