PLZ help can't get the Q9550 E0 ,OC more then 3.4 GHz

[Patrol]

hello guys i have Intel Core 2 Q9550 E0 stepping A, i got it OC 3.400 , stable , but i cant get it any higher then 3.400 GHz , ASUS P5QE , PSU corsair 1000 W , GAINWARD 4870x2 ,sound card is AUZEN X-FI prelude 7.1 , 8GB CORSAIR (800MHz) DDR2 ,4-4-4-12 at 2.1V. well i did set the CPU voltage up tp 130000 ,SB 1.10 , NB 1.20 , DRAM 1.84 , CPU SPREAD SPECTRUM disable , plz any help that can OC higher like up to 3.6 or even 4GHz on the ASUS P5QE , plz

 

[PlasmaBomb]

Do you want to break that down into lines to make it easier to read?

Then you may get more help.

CPU:
Mobo:
Ram:

Etcetera, you get the idea...

 

[PlasmaBomb]

Looks like you are running 400FSB, so I would start by bumping the NB to 1.25V and seeing if that gets you any further.

What timings are you running on the Ram? They are rated at 4-4-4-12 at 2.1 V but you are only giving them 1.84 V.

You may need to bump the voltage on the CPU (I presume you mean 1.300 V not 130,000V hehe).


What tests are you using for stability and what is it failing at?

PB

 

[taltamir]

read this: http://forums.anandtech.com/me...=2057083&enterthread=y

 

[PlasmaBomb]

Originally posted by: taltamir
read this: http://forums.anandtech.com/me...=2057083&enterthread=y

Excellent :thumbsup:

I was going to link to some other threads, but he already spammed them with the same info...

 

[OCGuy]

Transaction Booster: Disable

Also, your northbridge may need to be 1.3.

 

[Tempered81]

your 4 dimms of 800mhz ram doesn't make it easy to get that quad's FSB higher than ~415mhz, I'll bet.

 

[GundamF91]

4 DIMM should be no problem on the P5QE. I am running 4x2GB @ 425mhz FSB on 1.2v NB, make sure you enable Load Line Calibration. Also you may need vCore higher, ie. 1.35v.

 

[mrSHEiK124]

lol, someone "plz help" me, I'm at 3.4 GHz and I'm happy.

 

[Patrol]

hello guys i jst get back after long week at work any way , fist of all i wanna thx u for your
reply i appreciate you guys , well i end up hiting 3.5 GHz stable , using INTElBURN TEST pass which is good , well i did bump up the CPU V 1.39 V and the NB 1.3 ,SB 1.10 V,
so im going to enable Load Line Calibration and see if i can hit 3.6 GHz i take ur advice thx
you i get back to u soon thx u for ur help more adivce plz if u can thx you

 

[Patrol]

oh sorry i for git and the memeory set 4,4,4,12 .2.2 as well

 

[Patrol]

sorry again i made mistake with my post above memory set 4,4,4,12 , 2.2 V

 

[Patrol]

ok i just enable Load Line Calibration , trying 3.6 GHz ,CPU V 1.39 V and the NB 1.3 ,SB 1.10 V, try to boot i got BOSD , so im using air cooling , heat sink thermalright 120 ultra with 120 M fan ,
in front 3 fan 120. M , and at the back 2 fans one 80 m, and one 120 M , any more help plz