Please Help...XP333 trouble

[CzarChasm]

My system i just built:

Iwill xp333 v2.1
AMD XP 1700+
256 OCZ PC2700 DDR
Aopen Gforce2TI 64
Maxtor 60GB 133/7200

Jumper settings:
Memory Voltage: 2.5v
fsb: 133

When it posts, it shows my memory type DDR 200
and my processor type AMD ATHALON 1100MHz.

Is this right or am i doing some thing wrong?
Thanks for the help!!

 

[KurtD]

on the Iwill settings page in bios, set your fsb to 133 or 166 and then select the 133/166 Iwill async mode. I think that's how it works, I'm at work right now....

 

[tapir]

Check to make sure your mobo isn't jumpered to 100/100 FSB. If there's no jumper for that, check it in the BIOS. You want 133/133 FSB or something higher, but keep it synchronous - I've heard that the asynch 133/166 FSB performance is actulally worse than 133/133.

 

[panhead49]

the jumper dosent matter ......100 or 133.....eirther way , if you set you fsb to 133 in bios..it will boot right.....then it will show ddr at 266 ,and your chip at xp1700

 

[ScrapSilicon]

<< My system i just built:

Iwill xp333 v2.1
AMD XP 1700+
256 OCZ PC2700 DDR
Aopen Gforce2TI 64
Maxtor 60GB 133/7200

Jumper settings:
Memory Voltage: 2.5v
fsb: 133

When it posts, it shows my memory type DDR 200
and my processor type AMD ATHALON 1100MHz.

Is this right or am i doing some thing wrong?
Thanks for the help!! >>

the only thing you doing wrong is not coming back to your thread and giving us an update...sheez