I am new to OC and have read about "detuning" the memory after CPU overclocking. I wanted to overclock without overvoltage of any kind. I slowly increased FSB from 200 to 247 while leaving all other settings in Auto. My current overclock seems stable after overnight memtest and prime95. My only concern is that Kingston rates my ValueRam memory to 9-9-9-24.
Should I manually detune my memory back to Kingston factory ratings or leave them as they are?
CPU-Z shows the following (overclock in parenthesis):
CPU: 200 x 14 = 2.8MHz (247 x 14 = 3.458MHz)
DRAM Freq: 669.6MHz (653MHz)
FSB : DRAM: 3:10 (3:8)
CAS latency: 9 (7)
RAS to CAS: 9 (7)
RAS precharge: 9 (7)
RAS cycle time: 24 (20)
Bank cycle time: 33 (27)
Thanks.
Should I manually detune my memory back to Kingston factory ratings or leave them as they are?
CPU-Z shows the following (overclock in parenthesis):
CPU: 200 x 14 = 2.8MHz (247 x 14 = 3.458MHz)
DRAM Freq: 669.6MHz (653MHz)
FSB : DRAM: 3:10 (3:8)
CAS latency: 9 (7)
RAS to CAS: 9 (7)
RAS precharge: 9 (7)
RAS cycle time: 24 (20)
Bank cycle time: 33 (27)
Thanks.
