Please help me understand the projector enclosure

Davidalaska

Junior Member
Feb 25, 2019
4
0
6
Hi, my boss asked me to buy an enclosure for the projector located in the assembly workshop.Do you have any experience for this something new for me? I have also contacted one of the suppliers Deertv, it seemed meeting our requirements, but I have a question, how do I know the front glass won't distort the pictures? I was told that they use the very good quality front protection acrylic windows, the light Transmittance is around 95%. I appreciate your comments.Thanks.
 

Red Squirrel

No Lifer
May 24, 2003
69,949
13,465
126
www.anyf.ca
Hmm guessing it's a dusty environment? What you probably need is a box that is fully sealed but has an intake and exhaust. Intake would have a HEPA filter. Though if you want to get fancy you can even have it draw and exhaust air from/to another room like an office. This is a good idea if it's high up, so it does not overheat.

I don't know if this is something you can buy, if not, it would not be that hard to make. I don't think you have to worry too much about distortion. If it was a camera, maybe, but for a projector I think it will be fine.
 

BarkingGhostar

Diamond Member
Nov 20, 2009
8,410
1,617
136
This use to be a big thing years ago with home theater enthusiasts whereby they needed to discretely deliver cooled air and take away heated air--and also the luxury of controlling dust. The professional enclosures all had the required first surface glass to in/pro-habit reflection and keep image distortion to a minimum.
 

zinfamous

No Lifer
Jul 12, 2006
111,673
30,982
146
If a glass face is included in the box I wouldn't worry about distortion or light, because it should be selected for that purpose. Projectors in the movie theater are usually throwing from behind glass, after all.
 

Davidalaska

Junior Member
Feb 25, 2019
4
0
6
Hmm guessing it's a dusty environment? What you probably need is a box that is fully sealed but has an intake and exhaust. Intake would have a HEPA filter. Though if you want to get fancy you can even have it draw and exhaust air from/to another room like an office. This is a good idea if it's high up, so it does not overheat.

I don't know if this is something you can buy, if not, it would not be that hard to make. I don't think you have to worry too much about distortion. If it was a camera, maybe, but for a projector I think it will be fine.

Thank you very much.
Yes, the workshop is dusty and humid. This enclosure has an intake and outlet with fan cooling system. As you said, it helps me eliminate the distortion concern.
 

Davidalaska

Junior Member
Feb 25, 2019
4
0
6
This use to be a big thing years ago with home theater enthusiasts whereby they needed to discretely deliver cooled air and take away heated air--and also the luxury of controlling dust. The professional enclosures all had the required first surface glass to in/pro-habit reflection and keep image distortion to a minimum.

Thanks for all your inputs for me. It is really helpful for me.
 

Davidalaska

Junior Member
Feb 25, 2019
4
0
6
If a glass face is included in the box I wouldn't worry about distortion or light, because it should be selected for that purpose. Projectors in the movie theater are usually throwing from behind glass, after all.

Thanks. I think it's time to report my investigate results to boss now.