hi guys please help me!!! i recently got the kg7raid and a 1.4 ghz t-bird (266fsb) and its not workingr right. if it is on the fail safe default the computer willl usually boot up problem free(90% of the time) but then i'm only at that fail safe speed. if i change the cpu to the correct setting 1400(133) as listed in the soft menu and then save bios settings and reboot the computer turns off the monitor and doesnt come back on. I have this problem with the same cpu and board i'm building for a friend as well. It seems that all agp card cpu and ram is in nice and tight and i jus dont know what the problem, is . i've visited pauls unoffical page and didnt find this problem. if you can please help!!! do i need to change any of the cpu settings manually or what. The apu says
1400 blablah C - so i know its the correct CPU. there are no short outs cause the board has been tested out of the case on non conducting material. would appreciate any help thanks
1400 blablah C - so i know its the correct CPU. there are no short outs cause the board has been tested out of the case on non conducting material. would appreciate any help thanks
Facebook
Twitter