System specs:
MSI k8n ultra plat w/amd 64 3500+ winchester
thermalright xp-90 w/92mm tornado and both stock case fans
case: thermaltake shark (black)
2gb of OCZ el plat rev2
nvidia 6800gt
audigy 2 zs
2 74gb wd raptors in raid0 (yes i know raid 0 can crash, not a concern)
1 200gb wd 7200 sata drive
Scenario 1:
from bios: system 28C, cpu 41C; default bios settings except agp aperture 256, cool n quiet enabled, raid enabled with sata1/2 enabled, disabled big logo screen and set primary display adapter as agp
from cool n quiet: locks up windows xp have to press restart
Scenario 2:
from bios: system 24C, cpu 41C; default bios settings except agp aperture 256, cool n quiet disenabled, raid enabled with sata1/2 enabled, disabled big logo screen and set primary display adapter as agp
from cool n quiet: with just windows xp pro up with only symantec autoprotect on (other then other basic system processes)
vcore: 1.34v, 3.3v: 3.31v, 5v: 5:03v, 12v: 12.14v
cpu temp: 41Cc; sys temp: 11c, nb temp: n/a, cpu fan speed 0; nb fan speed 5625rpm
note: i have a vantec nexus fan controller which is why i assume there is a 0 rpm on the
cool n quiet
200MHz x 11.0
2210 MHz
a few questions:
1) why was cool n quiet locking up?
2) im wondering why cool n quiet has such a low sys temp? temperate in house is 72ish; i believe i have newest drivesrs for all
3) i would like to test this system out and see what are the acceptable overclocking speeds/settings, no too familar with this aspect of computers so any advice/links is appreciated; i've done some prelinary research but would appreciate some expert
opinions/suggestions
thank you
MSI k8n ultra plat w/amd 64 3500+ winchester
thermalright xp-90 w/92mm tornado and both stock case fans
case: thermaltake shark (black)
2gb of OCZ el plat rev2
nvidia 6800gt
audigy 2 zs
2 74gb wd raptors in raid0 (yes i know raid 0 can crash, not a concern)
1 200gb wd 7200 sata drive
Scenario 1:
from bios: system 28C, cpu 41C; default bios settings except agp aperture 256, cool n quiet enabled, raid enabled with sata1/2 enabled, disabled big logo screen and set primary display adapter as agp
from cool n quiet: locks up windows xp have to press restart
Scenario 2:
from bios: system 24C, cpu 41C; default bios settings except agp aperture 256, cool n quiet disenabled, raid enabled with sata1/2 enabled, disabled big logo screen and set primary display adapter as agp
from cool n quiet: with just windows xp pro up with only symantec autoprotect on (other then other basic system processes)
vcore: 1.34v, 3.3v: 3.31v, 5v: 5:03v, 12v: 12.14v
cpu temp: 41Cc; sys temp: 11c, nb temp: n/a, cpu fan speed 0; nb fan speed 5625rpm
note: i have a vantec nexus fan controller which is why i assume there is a 0 rpm on the
cool n quiet
200MHz x 11.0
2210 MHz
a few questions:
1) why was cool n quiet locking up?
2) im wondering why cool n quiet has such a low sys temp? temperate in house is 72ish; i believe i have newest drivesrs for all
3) i would like to test this system out and see what are the acceptable overclocking speeds/settings, no too familar with this aspect of computers so any advice/links is appreciated; i've done some prelinary research but would appreciate some expert
opinions/suggestions
thank you
Facebook
Twitter