• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Performance Issue with Win2k pro and win98

A

alobar

Member
I currently have 2 machines running 3com 10/100 nics and a netgear fs105 switch. The switch is also connected to a cable modem via the uplink port. Everything works fine and they can see each other's shares. But when d-loading from the 98 machine to the 2k machine using the ms sharing the w2k machine's cpu usage is steady around 70-80 %. I wanted to know if this is normal or what. Also i am only getting around 1200KB a sec transfer. Both nics are set to full-duplex and 100mb media type. The lights on the switch seem to be lit up the way they are suppossed to be. Any help would be greatly appreciated..

win2k machine
duron 750
256 pc133
61.4gb maxtor
3com 3c905 nic

win98se machine
tbird 1ghz
128 pc100
20 gb maxtor
27 gb maxtor
3com 3c905 nic

thanks

tom
 
Have you tried the latest 3com drivers for both Win2000 and 98? They are v1.80. I was having thise problem with two machines here, except it was a WinMe machine that was spiked. Do you have DMA enabled on the Win2000 box? Also check the properties of the NIC and make sure that the checksum offloads are enabled. I think that fixed my problem with the WinMe box.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top