Pentium D 965 EE 3.73GHz

[Lobo929]

Hey guys, I'm just a newbie. I have some questions about overclocking, hope you guys can help me.
I already overclock the CPU to 4.26GHz and my desktop's 3D Mark06 Score is 8432. CPU temperature:28c.(After overclock) FSBRAM 2:3 CPU core voltage 1.184

This is my System.
CPU: Pentium D 965 EE 3.73GHz
Heatsink: Thermalright Ultra-120 Extreme CPU Cooler with 120mm fan
Motherboard: ASUS Striker Extreme 680i
RAM: Crucial Ballistix 240-Pin DDR2 SDRAM DDR2 800 4GB (http://www.newegg.com/Product/...?Item=N82E16820146565)
Video Card: BFG Tech Geforce 8800 GTS 640MB OC2 (Single Card)
Power Supply: BFG Tech 800 Watt
Case Fan 120mm x 3 (Front, Side and Black)

I want to overclock the CPU and ram to get higher 3D Mark06 Score. (More than 10000, at least) (CPU FSB: 1333) (DDR2 1066) or (Clocks Bus Speed 400MH)
but I don know how to set these up in the BIOS system. Anyone knows how to do it?
I already updated the BIOS.

BIOS
Phoenix Technologies, LTD
ASUS StrikerExtreme ACPI BIOS Revision 1203

Memory
Frequency: 400MHz
FSBRAM 2:3
CAS#Latency 5.0 clocks
RAS#toCAS#Delay 5 clocks
RAS#Precharge 5 clocks
Cycle Time 18 clocks
Bank Cycle Time 23 clocks
Command Rate 2T


Thank you very much^^

 

[myocardia]

Welcome to anandtech. An E6750 would get you to right around 10,000. Overclock it a bit, and it should be well above 10,000. Also, you should overclock your video card, since 3dMark is a video card benchmark. Here are some other people's scores: link.

 

[PlasmaBomb]

Command Rate 2T

If you only have two sticks of ram you should be able to run it at the 1T command rate for a bit of a boost.

What are you using to measure the temps? 28*C is low unless that is an idle temp (although that is still a low idle temp for a netburst chip).

 

[Lobo929]

PC Wizard 2008