Pencil trick worked first try!

[Bigdude]

I just did the pencil trick with the L1 bridges on my Duron 650, it worked the first try. I went to 800 to test first on my K7T pro2A, works great, temp is lower than at 650, because I scraped off the pad, and used RadioShack white paste. 33c not too bad, 1.75 volts. Using a CoolerMaster fan, and my old 235watt ps is running good too, sytem monitor shows 5.0v 3.33v and 11.9 for the 12v supplies.

 

[2336]

Outstanding!

 

[Bigdude]

Can't get it to post faster than 850, upped voltage to 1.84 still only 850. I need 1gig, won't accept lower, I will have to find me another Duron.

 

[ZeroBurn]

if you're really hunting for 1ghz i'd suggest one garunteed to OC from compuwiz, a 750@1ghz will run you $120 or so, damn good if you ask me.

 

[Dan]

Bigdude: Good job with the pencil trick. However, you'll need a faster chip in order to hit 1GHz. I had a Duron 600 that topped out at 900MHz. Like you I wanted to break the 1 gig threshold so I sold that chip and picked up a Duron 700. That's been running stable at 1.083GHz for 3 months now.

 

[A2KLAU]

Not bad for first time! But you need a 750 to get it to 1GHz and for it to run stable! Anything lower and it will just be either unstable or not go!

Good Luck,

Albert.

 

[Jagators]

I've got a pair of D600@1000 at 1.85v on a Abit KT7 MB. Stable on both of them. 🙂

 

[Mustanggt]

way to go

 

[PsyNinja]

heh... damn, my duron 750 that I just got will only post at a gig (133*7.5) even with 1.85v
but it runs great at 933 with 1.75v
I used a HB lead pencil and it worked the first time as well!

 

[Asha'man]

Hmm with the case open, I can run my Duron 650@1050 at 1.85V

Case closed, no more than 970 though....OVERHEAT if I just think of running it at 1.85 🙁

Asha'man

 

[ocabj]

if you *need* a 1gig cpu, i suggest you buy a 1gig cpu.

 

[Bigdude]

"if you *need* a 1gig cpu, i suggest you buy a 1gig cpu"


What would be the fun of that? Anybody can buy a Thunderbird 1gig!