• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

PC not booting after installing RAM

B

BlackIce21

Junior Member
I installed a new 4GB Transcend 1333Mhz stick along with my old 4GB Transcend, both are exactly the same, and I'm getting a blank screen. The monitor is getting a signal but the nothing shows up on the screen. I tried removing the CMOS battery and reset the jumpers on my motherboard too.

I've tried removing the new stick and used only the old one but still nothing on the monitor. I've tried switching the modules around and it fits correctly and is seated properly. Any idea what the problem could be?

Thanks.

My specs are:
i5 3570k
Mobo -Asus P8H61-MX R2.0
AMD R7 265
1x 4GB Transcend 1333Mhz
Corsair CX430
 
Description P8H61-MX R2.0 BIOS 1108
Improve memory compatibility.
File Size 4.15 MBytesupdate 2014/05/07
Download from Global

I would update the BIOS,

Revert to your previous working configuration! Update the BIOS!
 
I figured out the problem apparently my video card wasn't seated properly which is weird because it was fine till I installed the new RAM stick. Thanks for all your replies! Yeah I'll have tu update my BIOS too.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top