I just installed a Tuniq 120 in my system. I was not oc'ing until I got a good cooler. I have been able to OC to 375FSB with no errors. However, I am not sure what to do about temp readings. I have CoreTemp, SpeedFan running. The temp of both cores is 47C under full load (SuperPI and Prime95 torture test), with the occasional jumps to the low 50s. For both cores, SpeedFan and CoreTemp show the same data. However, there are two temps in SpeedFan that are ridiculously high. The CPU temp is usually around 68C under load and idle. AUX temp is between 90C and 130C. I don't trust either of these numbers, but want to be sure I know my house won't burn down 
I have opened the case. There is nothing in it running extremely hot.
Therefore, my main question, is what temps should I be looking at for accurate data when OC'ing?
AdTHANKSvance for any help
System:
Asus P5W DH Deluxe
E6300
Mushkin HP 2x1GB (4-5-4-11)
Antec P160
Tuniq 120
nVidia FX1500 (upgrading soon)
I have opened the case. There is nothing in it running extremely hot. Therefore, my main question, is what temps should I be looking at for accurate data when OC'ing?
AdTHANKSvance for any help
System:
Asus P5W DH Deluxe
E6300
Mushkin HP 2x1GB (4-5-4-11)
Antec P160
Tuniq 120
nVidia FX1500 (upgrading soon)
Facebook
Twitter