• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

P5Q Deluxe - PC Probe II Fan & Power 0 RPM

J

jmt

Junior Member
I installed the PC Probe II program however, my power fan & chassis fan 1,2&3 show 0 RPM. I know they must be tied into the motherboard. How is this done. Also my CPU temp. shows 35c and my MB temp is 43c. Shouldn't the CPU always be hotter than the motherboard?
 
Under Power in bios you can make some settings for the fans, I never use the Asus software as I found it buggy since the 90's.

Larry
 
Originally posted by: Big Lar
Under Power in bios you can make some settings for the fans, I never use the Asus software as I found it buggy since the 90's.

Larry
Click to expand...

Hi Larry,
Yes I did locate those settings in the bios. My problem is that I have those (1 power & 3 case) fans running directly from my power supply to the fans. I believe I should power them off the motherboard to get that control. Hopefully someone may know how that's done.
 
They end in a molex. The wire from the fans ends with a small plug that the molex plugs into and then the molex into the power. I can remove the molex ends and then the fans will end with the small plug. Would the small plug then go into the MB?
 
Originally posted by: BlueAcolyte
Ok, do your fans end in a molex or a small plug?
Click to expand...

Your question gave me the answer. I disconnected the molex ends and found the fan power connections on the MB. Now that the MB is controlling the fan speed, my system is very quiet. Now temp. controlled rather than always at 100%.

Thank you very much.
jmt
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top