i am trying to O/C an old PD 805 (on newest bios) on this mobo and i tried to up the fsb to 166 from 133. on next reboot, it sounds like it is booting normally but i get no display.
i tried to lock the PCI-E to 100 and the PCI slots to 33.33mhz but no joy.
the vcore was 1.4 so should be enough and the RAM was locked to 533 (stock). i am sure i have read somewhere about trying a PCI card and see if that works any better.
anyone had the same experience?
i tried to lock the PCI-E to 100 and the PCI slots to 33.33mhz but no joy.
the vcore was 1.4 so should be enough and the RAM was locked to 533 (stock). i am sure i have read somewhere about trying a PCI card and see if that works any better.
anyone had the same experience?
Facebook
Twitter