These tests were done using a PCI Bus Analyzer
AGP/PCI Lock Test
With the freq setting set at 33.3mhz, I tested each fsb setting from 133fsb to 170fsb. The lock worked fine, without so much as a flux.
At regular intervals I ran a benchmark and copied a large file from my cd-rom in an attempt to load the bus, and the freq never wavered.
I also tried setting the freq setting at different freq?s and at different fsb?s and all seemed to work fine.
AGP/PCI Auto Setting Test
This is where it get?s interesting. I set the freq setting to Auto, and then tested each fsb setting from 133fsb to 170fsb. Here are my results:
FSB(mhz)?PCI Bus freq(mhz)
133?33.6
134?33.4-33.5
135?33.7
136?33.9-34.0
137?34.2
138?34.4-34.5
139?34.7
140?34.9-35.0
141?35.2
142?35.4-35.5
143?35.7
144?35.9-36.0
145?36.2
146?36.4-36.5
147?36.7
148?36.9-37.0
149?37.2
150?37.4-37.5
151?37.7
152?37.9-38.0
153?38.2
154?38.4-38.5
155?38.7
156?38.9-39.0
157?39.2
158?39.4-39.5
159?39.7
160?39.9-40.0
161?40.2
162?40.4-40.5
163?40.7
164?40.9-41.0
165?41.2
166?41.4-41.5
167?41.7
168?41.9-42.0
169?42.2
170?42.4-42.5
171?42.7
172?43.0
173?43.2
174?43.4-43.5
175?43.7
176?43.9-44.0
177?44.2
178?44.5
179?44.7
180?44.9-45.0
181?45.2
182?45.4
183?45.7
184?45.9-46.0
185?46.2
186?46.5
187?46.7
188?46.9-47.0
189?47.2
190?47.5
191?47.7
192?47.9
193?48.2
194?48.4
195?48.7
196?49.0
197?49.2
198?49.5
199?49.7
200?50.0
201?33.4-33.5
202?33.6
203?33.8
204?34.0
205?34.1
206?34.3
207?34.4-34.5
PCI Bus Overclocking Test
33.3mhz to 38.7mhz worked as advertised, settings above fluxuated as follows?
39.0mhz = 38.9-39.1mhz
39.3mhz = 39.2-39.3mhz
39.6mhz = 39.5-39.6mhz
39.9mhz = 39.8-39.9mhz
40.2mhz = 40.1-40.3mhz
AGP/PCI Lock Test
With the freq setting set at 33.3mhz, I tested each fsb setting from 133fsb to 170fsb. The lock worked fine, without so much as a flux.
At regular intervals I ran a benchmark and copied a large file from my cd-rom in an attempt to load the bus, and the freq never wavered.
I also tried setting the freq setting at different freq?s and at different fsb?s and all seemed to work fine.
AGP/PCI Auto Setting Test
This is where it get?s interesting. I set the freq setting to Auto, and then tested each fsb setting from 133fsb to 170fsb. Here are my results:
FSB(mhz)?PCI Bus freq(mhz)
133?33.6
134?33.4-33.5
135?33.7
136?33.9-34.0
137?34.2
138?34.4-34.5
139?34.7
140?34.9-35.0
141?35.2
142?35.4-35.5
143?35.7
144?35.9-36.0
145?36.2
146?36.4-36.5
147?36.7
148?36.9-37.0
149?37.2
150?37.4-37.5
151?37.7
152?37.9-38.0
153?38.2
154?38.4-38.5
155?38.7
156?38.9-39.0
157?39.2
158?39.4-39.5
159?39.7
160?39.9-40.0
161?40.2
162?40.4-40.5
163?40.7
164?40.9-41.0
165?41.2
166?41.4-41.5
167?41.7
168?41.9-42.0
169?42.2
170?42.4-42.5
171?42.7
172?43.0
173?43.2
174?43.4-43.5
175?43.7
176?43.9-44.0
177?44.2
178?44.5
179?44.7
180?44.9-45.0
181?45.2
182?45.4
183?45.7
184?45.9-46.0
185?46.2
186?46.5
187?46.7
188?46.9-47.0
189?47.2
190?47.5
191?47.7
192?47.9
193?48.2
194?48.4
195?48.7
196?49.0
197?49.2
198?49.5
199?49.7
200?50.0
201?33.4-33.5
202?33.6
203?33.8
204?34.0
205?34.1
206?34.3
207?34.4-34.5
PCI Bus Overclocking Test
33.3mhz to 38.7mhz worked as advertised, settings above fluxuated as follows?
39.0mhz = 38.9-39.1mhz
39.3mhz = 39.2-39.3mhz
39.6mhz = 39.5-39.6mhz
39.9mhz = 39.8-39.9mhz
40.2mhz = 40.1-40.3mhz
