• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

P4B333 1005 Bios

C

Compnut

Member
Does any one know for sure what the AGP and PCI buss dividers are on the P4b333 mob with the 1005 bios revision? Before I installed the 1005 bios the most my 1.6P4 would do was 160fsb 2560Mhz but after installing the 1005 bios I was able to run at 164fsb 2624Mhz 1.75vcore. Probably not stable but played Q3a on the internet. Have to set the ram at 4:3 2.5 4 4 7 above 154fsb. Runs at 1:1 2 2 2 6 at 154fsb

Kingston 128mb PC2100 ram
G Force 2 pro video
Realtec lan card
WD200BB Hard Drive
On Board sound
 
I don't remember reading at asus's site as those being any of the issues fixed in the 1005 bios...

 
Just out of curiosity, what is the point of running at such speeds if you have to slow down your RAM?

You should either run slower and make the RAM faster, or get better RAM.
Granted it is awesome that your RAM will run that fast.

But in all the benchmarks I have done, the computer is faster with a lower FSB (thus lower clock speed) and a higher memory speed. Try running a little slower, and get your memory to 2.2.2.5 and a 4/5 memory clock/ratio. Just my suggestion....
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top