P4B266-C and DDR voltage setting, where is it in BIOS?

[f13dfx]

I've looked everywhere in the BIOS, but I cannot find variable setting option for voltage for DDR-Ram.

Can someone clue me in

TIA

 

[sc0tty8]

In my bios, it is on the CPU voltage I belive.

 

[surfactant]

 

[surfactant]

I believe they are jumpers located around the processor (in back ). I just instaled mine and booted up to 133 bus my temps I feel are inaccurate. the are 40-41c ont the bios hardware monitor but only 20c in mb monitor 5 what do you use to monitor temps?? Mark

 

[John]

Look in your manual. Its a row of jumpers above the DIMM slots.

 

[f13dfx]

John:

Thanks, found it!

 

[sc0tty8]

<< I believe they are jumpers located around the processor (in back ). I just instaled mine and booted up to 133 bus my temps I feel are inaccurate. the are 40-41c ont the bios hardware monitor but only 20c in mb monitor 5 what do you use to monitor temps?? Mark >>



Since when does ram have temp sensors in them?

 

[RalfHutter]

I suspect surfactant is talking about his CPU temps. The sensor to use for this board is "Asus 2" for CPU temps, "Asus 1" is the MoBo temp sensor.

 

[surfactant]

Thanks scotty for the info--sorry i was unclear on the earlier post. These temps seem too low 24-27c ?? I am using 1.6 at 2.1 and 266-c would a bios flash maybe get more accurate temps?? i noticed there is a new bios compared to the one on my board. or am i just used to higher temps my other machine is a amd 1.2 and is warmer and louder. thanks for any information Mark