P3 700e cbo + BH6 1.01 + 1.75V + 128 PC100 RAM = 933Mhz!!!

[Childs]

I was surprised as hell to get 933 out of a BH6 1.01, but I got it with minimal effort. The BH6 is the all-time mobo champ in my book!

 

[gtd2000]

This message brought to you on a BH6 with 128MB Hitachi PC100 RAM using a PIII450 @ 600Mhz @ 2.0v

 

[LarryJoe]

Congrats! The 700e cb0's are champs. I hit 933 with ease, haven't tried higher because I like that sweet spot of a 133fsb,33 pci bus and cas 2-2-2 with PC133.

LJ

 

[dudleydocker]

OK, I bought a P3 700 and got a cB0, bought a Abit BF6 and slot adapter. Sucessfully set the board voltage to 1.9 through the BIOS. It boots but still only show 700 on CPUID. Rest of system: Corsair PC133 128 MB, Matrox G400, Seagate 18 GB SCSI with Adaptec 19160. This is my first attempts at OC, so be nice! Any help or reference to other threads is appreciated.

 

[mechwarrior]

Dudley, did you change the FSB in the bios?

 

[Toro 45]

Ah yes the BH6, the little board that could.Mine just refuses to lay down & die(533 @ 936).
Toro

 

[garrison]

if you replace yr pc100 module you should push yr CuMine maybe over the gigahertz (using some 'hardcore' cooling method).
dont you think the beautiful part of this mb is the tiny socketed bios chip?
_
CuMine 700e cb0 @ 970/139
Micron PC100 CAS2 @ 3-3-3
Abit BH6 1.1 sp bios
IBM DPTA 20gb/CL SB64/CL 56K

 

[dudleydocker]

All I have changed so far is the board voltage. I saw some benchmarking data at another website as well as another thread here about the P3 700. What should the FSB be set to ? Thanks.