P2B w/Slotket in a Inwin case??

[Mikelpsxer]

I am looking to get a fcpga p3, so I need a slotket, but my problem is I don't think that any of them will fit in my computer w/ the setup I have. I have a asus p2b and an Inwin mid tower (don't know the part #), but the power supply is sideways right above the processor. So I guess my question is- Does anyone know of a slotket that will fit in there and not touch the power supply?

 

[Mikelpsxer]

Anyone? Any help would be appreciated.

Thanks, Mike

 

[The Wildcard]

Hmm that's a tought situation then but i think it should fit since i assume your original cpu was a slot-1 type correct?

 

[odog]

Asus S370-DL

when i was building rigs... thats the only card i could find that consistantly fit in the inwin A500 without considerably bending the mobo🙂

 

[Tonec]

Sound like you own the A500 midtower, someone has to have had this combo before.

 

[Mojonba]

On http://www.bunta.com Support Highlites part it says that neither Abit nor Epox slotckets will fit on your case.

 

[Stringy]

I have an InWin A500 with a P2B and a sloket.. works fine.. tho there isn't alot
of room to play with...



Craig
Update you can always goto the InWin's website to make
sure you have the correct model..

 

[Midnight Rambler]

Actually InWin came out with an S500 model, which is just the A500 with the PS moved up to give more clearance. There might be a couple other minor differences, but the clearance is the main one.

 

[Stringy]

Yes, I've actually have used the S500, and it has no clearance problems...
it adds a smaller profile (its narrower)
Adds a place for a Fan below the PSU
Adds a drive "rail" system for screwless drive installation

the S500 is quite nice.. tho, I kinda like my A500's sliding MoBo tray
(which is gone in the S500)


Craig

 

[hans007]

for the a500, i've use the msi 6905 and an aopen slotket with no problems.

 

[mgc]

Use a MSI 6905 rev 2 sloket. I have an Inwin A500 and it was the only one that fit.

 

[Mikelpsxer]

Thanks for all the help guys. The case is the A500. Sorry I forgot which one it was. So I guess I can get either the msi6905 or asus slocket and it should fit ok. 😀
Thanks again, Mike.