P180 - Drive Rails

[bgc99]

How should the 3 1/2 and 5 1/4 drive rails be mounted so the front of the drive is properly aligned with the front of the case?

BGC

 

[MDE]

Trial and error. Screw them on and see if it fits, if not, then try another position.

 

[lenjack]

Agreed. Just 2 screws loosely in place should enable you to tell.

 

[Shadowknight]

The metal part of the rails should be even with the front bezel of the drive you're installing.

 

[bgc99]

Originally posted by: Shadowknight
The metal part of the rails should be even with the front bezel of the drive you're installing.

thanks

 

[JBDan]

Originally posted by: MDE
Trial and error. Screw them on and see if it fits, if not, then try another position.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
And ShadowKnight is right on...as far as the depth.