Hi,
This is my first build:
Thermaltake XASER III Case V2000A
MSI MB K8N NEO2 PLATINUM
AMD Athlon 64 FX-53, 1MB L2 Cache, 939 Pin
ZALMAN CNPS7000B-Cu Copper CPU Cooler
OCZ EL Platinum Revision 2 Dual Channel Kit 1GB(512MBx2) DDR PC-3200
OCZ DDR Volt Booster
Lite-On 16X DVD Dual Drive, Model SOHW-1633S Black
Lite-On Black 52X32X52X16 Combo Drive, Model SOHC-5235K BLACK
Creative Labs Sound Blaster Audigy2 ZS Platinum PCI Sound CARD
2 - Western Digital Raptors 74GB 10,000RPM SATA Hard Drive 8MB in Raid "0"
Maxtor Ultra Series Kit 200GB 7200RPM SATA Hard Drive
eVGA nVIDIA GeForce 6800 Ultra Video Card
OCZ PowerStream 520W Power Supply With Adjustable
Power Rails With LED Indicators, SATA Connectors
IN-WIN 7-in-1 USB Card Reader BLACK
I/O Magic 1.44MB 3.5 Inch Internal Floppy Drive, Black Bezel
Added: Two Blue LED Fans
A green light that pulses to the bass
A liquid Blue Neon Lght
Existing Equipment:
Dell Trinitron 19" CRT
Deskjest 970 Cxi Printer
Logitech Freedom 2.4 Cordless Joystick
Logitech wireless keyboard and mouse
HP scanner5100c
This is what I am currently running:
MB Ver: 1.4
High Performance Mode: Manual
Cool and Quiet: Disabled
Dynamic OC: Disabled
Aggressive Timming: Disabled
Mem: Max Mem Clock Speed 200, 1:1
Timmings: 2.5 3 3 10 1t
HT Frequency: 3x
HTT, FSB: 265
CPU Ratio: 10x
Spectrum: Off
CPU vid at start up 1.55
% over CPU Vid: 5%
Vcore: 1.62 - 1.63
Mem Volts in BIOS: 2.5V
Ram Booster: 3.2V
AGP Aperture: 32MB, lowest
AGP Fast Write: Disabled
AGP Side Band Addressing: Disabled
I am getting many physical memory dumps but this was at lower ram booster voltage 2.9 - 3.2 and I read somewhere in a forum that my particular Motherboard isn't happy until it sees 3.4 Volts from ram booster so I am currently. We will see?
Can't seem to run Prime 95: get either unexpected sum or some other error when doing torture test and it happens right away. This was also @ the lower voltages.
Had a benchmark score of 12,745 or there about in 3DMark03? Uped it to 13,550 with Fast writes and Side Band Addressing enabled but this can cause problems so I have read?
Well, any help or suggestions would be appreciated as I'm a newb @ oc.
Thanks!
Wow 45, readers and no input? I could use some suggestions.
This is my first build:
Thermaltake XASER III Case V2000A
MSI MB K8N NEO2 PLATINUM
AMD Athlon 64 FX-53, 1MB L2 Cache, 939 Pin
ZALMAN CNPS7000B-Cu Copper CPU Cooler
OCZ EL Platinum Revision 2 Dual Channel Kit 1GB(512MBx2) DDR PC-3200
OCZ DDR Volt Booster
Lite-On 16X DVD Dual Drive, Model SOHW-1633S Black
Lite-On Black 52X32X52X16 Combo Drive, Model SOHC-5235K BLACK
Creative Labs Sound Blaster Audigy2 ZS Platinum PCI Sound CARD
2 - Western Digital Raptors 74GB 10,000RPM SATA Hard Drive 8MB in Raid "0"
Maxtor Ultra Series Kit 200GB 7200RPM SATA Hard Drive
eVGA nVIDIA GeForce 6800 Ultra Video Card
OCZ PowerStream 520W Power Supply With Adjustable
Power Rails With LED Indicators, SATA Connectors
IN-WIN 7-in-1 USB Card Reader BLACK
I/O Magic 1.44MB 3.5 Inch Internal Floppy Drive, Black Bezel
Added: Two Blue LED Fans
A green light that pulses to the bass
A liquid Blue Neon Lght
Existing Equipment:
Dell Trinitron 19" CRT
Deskjest 970 Cxi Printer
Logitech Freedom 2.4 Cordless Joystick
Logitech wireless keyboard and mouse
HP scanner5100c
This is what I am currently running:
MB Ver: 1.4
High Performance Mode: Manual
Cool and Quiet: Disabled
Dynamic OC: Disabled
Aggressive Timming: Disabled
Mem: Max Mem Clock Speed 200, 1:1
Timmings: 2.5 3 3 10 1t
HT Frequency: 3x
HTT, FSB: 265
CPU Ratio: 10x
Spectrum: Off
CPU vid at start up 1.55
% over CPU Vid: 5%
Vcore: 1.62 - 1.63
Mem Volts in BIOS: 2.5V
Ram Booster: 3.2V
AGP Aperture: 32MB, lowest
AGP Fast Write: Disabled
AGP Side Band Addressing: Disabled
I am getting many physical memory dumps but this was at lower ram booster voltage 2.9 - 3.2 and I read somewhere in a forum that my particular Motherboard isn't happy until it sees 3.4 Volts from ram booster so I am currently. We will see?
Can't seem to run Prime 95: get either unexpected sum or some other error when doing torture test and it happens right away. This was also @ the lower voltages.
Had a benchmark score of 12,745 or there about in 3DMark03? Uped it to 13,550 with Fast writes and Side Band Addressing enabled but this can cause problems so I have read?
Well, any help or suggestions would be appreciated as I'm a newb @ oc.
Thanks!
Wow 45, readers and no input? I could use some suggestions.
Facebook
Twitter