Overclocking the Celery 466 ppga

[Stumps]

Does any body know if the 466mhz (7x66mhz)celery will run at 700mhz (7x100)with a decent HFS unit.
If not what is a good speed to aim for as I don't know too much about overclocking Celeron ppga with bloody multiplier locks.
What is a good voltage to use.
I have 2 of these 466 and will be using them on an Abit BP6 SMP mobo.

 

[blackhawk]

These cores top out at about 500 or a little bit more so not much potential. Best value is a 366 at 550 on that mb.

 

[oldfart]

Run 7 x 75 = 525.

 

[Stumps]

What voltage adjustments should be made or will it run at the default Voltage.

 

[Diogenes2]

If it don't run at default, try bumping.. I had several 366's that ran 550 at 2.0, but I had one that I had to bump to 2.2...

Whatever works..

 

[oldfart]

Should be ok @ default. Bump it just a bit if there is any instability.

 

[DimZiE]

try 7x83=581 MHz.... i don't recall what voltage is at..
but i did bump it up...

 

[oldfart]

I'm not a fan of 83 MHz FSB. It puts your PCI @ 41.5, which is way out of spec. Your PCI cards and HD may not be too happy. 75 FSB has a PCI speed of 37.5 which should not cause any problems.

 

[Stumps]

Thanks guys

 

[culan]

I think you can increase voltage to 2.3-2.4 FSB to 83.3 Mhz.
I may work.