Overclocking the Celeron 2GHz

[mooojojojo]

anyone have it at 2.66? if yes, can you give me the settings you're running at?
- FSB - I guess that would be 533?
- memory speed - 266MHz?
- the core voltage. the default is 1.525 if I'm not mistaken. but how far should I go?.

thanks in advance!

 

[Speedy3D!]

you can probably get it to 3.0GHz no problem.

 

[bjc112]

Originally posted by: mooojojojo
anyone have it at 2.66? if yes, can you give me the settings you're running at?
- FSB - I guess that would be 533?
- memory speed - 266MHz?
- the core voltage. the default is 1.525 if I'm not mistaken. but how far should I go?.

thanks in advance!

Start upping your FSB by 10 at a time, run Prime 95 and loop 3dmark to see if its stable. If its pretty stable but crashes late in the testing, bump your voltage 5 %... Run again, if stable go higher..

Like Speedy said, that thing will probably hit 3 ghz

 

[mooojojojo]

ok, but do I run any serious risk if I directly run it at 2.66GHz - 533MHz FSB, 266MHz memory and bump the voltage to like 1.55V?

 

[ericboo]

I run a Cel 2.0 at 132FSB (max my bios will do) without any problems. No voltage increase either.

 

[LouPoir]

I had 2 of them - both sold. They would each hit 2.8 at default vCore. Sweet.

Lou

 

[dexvx]

They're really good for an office computer or a cheap A/V encoder/decoder, as its mostly Mhz bound.