Overclocking Help Needed

[Exodia]

Hey,i finally got all the parts for my system.So i want to give overclocking a go, just to squeeze out a little more performance.So were do i start?What do i enable or disable?
Currently these are the specs:

Bios Version : W7025NMS v1.5

Cell Menu
==========
High Performance Mode = Manual
Aggressive timing = Disabled
Dynamic Overclocking = Disabled
Spread Spectrum = Disabled
HT Frequency = 4X
Cool 'n' Quiet = Enabled
AGP Frequency = 67

My sata drive is on SATA4.I want to get it to at least 2.5GHz [if possible] without raising any voltages cause i'm afraid i might blow something up.I would really like it you guys could recommend me a guide for the similiar specs i have or help me get started.
Thanks Alot.

 

[Heckler 5th]

trust me, it's better for your mental health that you read up on overclocking rather than trust someone else to tell you what's best for your rig.

there are 3 stickied threads on this page, start with the middle one.
http://www.dfi-street.com/forum/forumdisplay.php?f=9

now, the "cell menu" is msi's way of making OCing easier. you can simply play around with Dynamic Overclocking, Aggressive Timing, etc. i don't have an MSI board so i can't tell ya much about the cell menu. but the sticky i linked you to describes the basics of OCing the AMD64.

i trust you've read this one too?
http://forums.anandtech.com/messageview...atid=28&threadid=1497607&enterthread=y

good luck, man! welcome to the AT forums!

 

[drsafety]

http://www.ocforums.com/showthread.php?t=263753

make sure you know what you are doing before you tinker with bios settings, you don't want to fry your components.