HI I am not Intelia but her husband . When I first started O/C I wanted better than Ambient room temps . I have a very extensive backround in stock car racing so I used a trick racers use. I believe in a closed PC case that is more true to real world. I don,t like TEC or any other freezer device mounted on a cpu . So after a little thought I said to myself how about just a normal water cooling system and run a Fuel system cool can and fill it with dry ice. So I dug out an old insultated cool can looped into the system and was amazed -10 c . the dry ice lasted about 6 hours. (don't touch dry ice with bare skin) I was able to get a 2.8C H/T to run @ 4.2+ stable. I don't use this any longer as I came up with another system using tec with temp controller $$$$$. You can get a Insulated cool can for about $70. Very effective and cheap. Any way you can O/C PC High for about 6 hours using this method run your benchies impress the world.When dry ice evaperates simply lower your O/C to what water can handle. If you try this. THIS IS IMPORTANT BEFOR ADDING DRY ICE TO THE SYSTEM IT MUST BE RUNNING OR CONDENSATION CAN OCCUR. After system is running there will be no problems.
You can get dry ice @ any welding supply company.
The most important thing in a good O/C is aM/B and memory that supportsit. Just do a little research. I have my wife do that for me.
Well some one is having fun with me on the edit but I well try to get around it.
If you use a tec without Temp controller again it is important that you have the system running befor you engage the tec or condensation may occur.
Facebook
Twitter