• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

overclockin celly ppga 366

Is it tihe stock instel HS/F? You may be able to hit 550 with the stock, but it may be better to go get the GORB or something else that is relatively cheap. I had a friend who had a GORB and it worked fine @550.
 
You'll probably be fine with the stock fan. I got me an Gorb, but found it too noisy, so I went back to the old heatsink.
 
I had one that I ran @578MHz for about 6 months with just the stock heatsink fan unit. You should be fine unless it takes more than stock voltage to achive it. If it takes 2.2+volts to get there, than you really should get better cooling. Either way make sure you at least use some Radio Shack thermal paste.
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top