OVERCLOCKERS: Whose memory do you run?

[Lonyo]

Just to see who seems to be the most popular/best brand of RAM for OVERCLOCKING.
If there are any I've missed, I'll add them, but there can't be many more, and I think I got all the major players.
Obviously I'm not including generic, that can go under other (if you're mad enough to overclock with generic RAM).

This assumes you run only one brand (I have some OCZ and some Samsung), if you do run multiple brands you have a choice.
If one stick OC's better than the other, then select that brand, if you have say 4 sticks, and 2 are from one brand, the other 2 are from 2 different brands, choose the one you have most of, or choose the one you prefer.
It's up to you if you run multiple brands, so choose which ever you feel most comfortable with. Or you can go for "other".

 

[theMan]

i am an overclocker, but i dont have "overclocking ram" just some corsair pc3200 C2.5

 

[furballi]

I run Value RAM...Corsair, KingMax, and Kingston PC3200. FSB is limited to about 260 MHz (Athlon 64 CPU).

 

[Markfw]

The winchester 3000+ I just pulled out to run my X2 4400 got put in a cheap chaintech board, running PC2100, and overclocked from 1.8 to 2.1 using it !!!

 

[Avalon]

I've had a gig of Mushkin Blue UTT for a month that I STILL haven't finished overclocking...and this thread has reminded me to finish what I started! Right now I think the stuff is running at 2-3-3-6 230mhz @ 3v. Can't remember, lol.

 

[Promethply]

The A64 3500+ in my system is OCed 1:1 @1165 HT, using 2 X 512MB Corsair Value Select RAMs.

 

[JohnAn2112]

Take a guess.

 

[TStep]

Originally posted by: OCZ John
Take a guess.

Plead the 5th if you don't

 

[imported_g33k]

I myself use corsair vs for my skt754. For the new systems Ive been building for people, have been the dfi board and some ocz value vx. The value vx is really a bargain oc ram.

 

[n yusef]

I use OCZ Value VX, becuase I can do 2-2-2-7 @ 246MHz with 3.3V, for only $90

 

[Concillian]

Need multiple selections:
OCZ (older)
Patriot (1GB sticks)
Mushkin (value RAM)
TwinMOS (CH5)
Crucial (registered ECC in my fileserver) actually, I think it's old enough that it's called Micron.

I have also used Kingston

You may be able to tell... I'm not terribly brand loyal.

 

[imported_whatever]

2*256 KHX PC3000 BH-6 @ 240/3.5v or so
2*256 Corsair PC3200 CH-5 @ 225/2.8v or so

 

[imported_Kensai]

I run more that one brand in my systems for overclocking. I've got Mushkin, Corsair, Kingston, OCZ and Samsung.

 

[Bona Fide]

Haven't tried overclocking RAM yet, but OCZ seems like the way to go...

 

[Lonyo]

Originally posted by: OCZ John
Take a guess.

I hope you're happy now.

 

[Budman]

2 years old Cas 3 Crucial Pc3200 2.5v double sided running @ 250mhz (ddr500) 2.8v 3-3-3-8.

2 years ago it was very expensive too. but I got some good ram there.

 

[stevty2889]

PQI Tubro PC4000 and Kingmax Hardcore PC4000

 

[MDE]

Mushkin Value

 

[keeleysam]

Corsair XMS
Corsair Value Select

It's all I buy.

 

[n7]

Originally posted by: theman
i am an overclocker, but i dont have "overclocking ram" just some corsair pc3200 C2.5

Same. I like teh dividers

 

[BW86]

Mushkin Value

:thumbsup: Great ram for the price.

 

[teutonicknight]

Corsair Value Ram.

Works for me: 3200+ (2.0) @ 2.5 GHz

 

[JBT]

Kingmax

 

[Fern]

Benn using Corsair in my OC'd rigs for a couple of years. Been very pleased with it. But as usual, I'm open to whatever works great at a good price.

Fern

 

[jpeyton]

TCCD...great bandwidth and high clock speeds without a lot of voltage or cooling.