Hi all, I have been tinkering with my E6850, trying to push it as far as I can go. So far, I am up to 3.825 with the following settings. I wanted to find out if I'm over doing the voltages for my chip & motherboard (680i) ?
Motherboard: eVGA 680i SLI
CPU vCore: 1.42
FSB: 1.4
SPP: 1.45 (had to bump this up 1)
MCP: 1.50 (had to bump this up 1)
SPP <-> MPP: 1.20 (unchanged)
My memory is the Muskin PC2-8500 which is linked & synched, SLI disabled.
My idle temps are around 38c, load temps: 58c
Thoughts?
Motherboard: eVGA 680i SLI
CPU vCore: 1.42
FSB: 1.4
SPP: 1.45 (had to bump this up 1)
MCP: 1.50 (had to bump this up 1)
SPP <-> MPP: 1.20 (unchanged)
My memory is the Muskin PC2-8500 which is linked & synched, SLI disabled.
My idle temps are around 38c, load temps: 58c
Thoughts?
Facebook
Twitter