Ok I cant bring up the memory menu on the DS3

[Telon]

I read that you hold down CRT + F1 on boot up but when i do i get no change it just boots up.

One other thing and soory I haven't overclocked in a long time. I see were othere's will post somthing like 4-4-4-12 but that wont cover all of the settings on the memory.

 

[renethx]

Press CTRL-F1 from the main menu.

 

[Telon]

OK I tried that before and I tried it again. I tried CTRL-F! from every menu and screen all the way into and including windows with no luck.

I had seemed to get around a lot better with my old DFI board.

TO bad I dont recall what to adjust on my memory once I get there though lol.

 

[Bozo Galora]

just keep tapping Del button after pushing PC start button
you should eventually then see main bios menu screen that shows all sub menus
(pge 32 of the PDF download vers of manual)
When there simultaneously hit both cntrl and F1 keys - the screen should blink
This gives you a few extra optioins in ea section
Go into bios "advanced" section, find and turn off full screen logo (the big DFI splashscreen)
Then the stupid password check with nothing entered (just do it)

"Password Check
"Setup The system will boot but will not access to Setup page if the correct
password is not entered at the prompt. (Default value)
System The system will not boot and will not access to Setup page if the correct
password is not entered at the prompt.
If you want to cancel the setting of password, please just press ENTER to make [SETUP] empty"

 

[Telon]

ok I have never had the problem geting into the main bios screen, just the one were you hit cntrl-f1 will keep tring though

 

[Bozo Galora]

remember - cntrl F1 doesnt seem to do anything - you get a few extra options AFTER you go in sub menu's.

it is really really stupid

and if you want help for RAM timing, you need to post RAM you are using
and you need to download CPU-Z