• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

OCZ Platinum 2GB kit not running rated speeds

Gillbot

Gillbot

Lifer
I posted on the OCZ forum as well but the issues are:

If I manually set the timings as rated 400fsb @ 5-5-5-15 my system refuses to post. If I set it to auto, it will post but at 5-6-6-15 even though CPU-z shows the SPD at 5-5-5-15 @ 400mhz. Now, I have to increase the voltage to 2.1v to keep the system stable, before it only needed 1.8 and it seems to be getting worse. I tried putting a fan on it but that didn't help.

Any ideas/suggestions?
 
I can't OC it at all, the best I can get out of it is 429MHz @ 6-6-6-18 but it won't even post in my system is I set it to 5-5-5-15 @ 400MHz. I'm baffled since it HAS to be on auto for it to work at all, then on auto it runs it so slowly.
 
I personally wouldn't worry about overclocking the RAM, since the real life difference does not justify the increased stress and heat.

But it MUST run at the rated speed, timings and voltage.

Again - I would RMA, or at least contact the OCZ.

Good luck!
 
You must log in or register to reply here.

TRENDING THREADS

Back
Top