Oc'ing succes.. but... what to do when ya get a blank black screen?

[Vampirrella]

I knew i would cause some trouble..! heh I think i had set it up as 133 x 11.5 on accident instead of 10 and now whenever i try to boot i get a blank (black screen) and the monitor doesnt come on.

This is a KT7A-RAID board.. any ideas? I dont think i would have broken anything this fast would i have?

 

[dethman]

clear the CMOS on your board. it's a little jumper on the physical board...leave it on clear for about 3 sec, and replace on original setting. then your cmos should be set to default...

 

[Vampirrella]

ok that worked.. dang you guys are great! Thanks for the help

I know many things here are in the thick manual but i like to see the responses i get on here from real ppl rather then a dumb book... or maybe im just lazy? hee

-=Vampie=-

 

[JustStarting]

also you can try holding down insert key while powering up computer. usually works first try, but some people have to try 3 or 4 times. it restores defaults in bios. easier than digging into case.