If you guys dont mind I need some help here. My board was acting crazy so I ended up clearing the CMOS. Now all the help you guys gave me to OC my ASUS P5Q PRO and E8400 are down the drain. LOL! I have it OC to 3.6 but I think its running hot. You guys gave me tons of settings and I only remember half or maybe none. Who knows, lol! Check it out.
C1E, CPU TM Fuction=Both Disabled
Execute Disabled Bit=Enabled
Dram Static Read Control, Dram Read Timing, Mem. OC Charger, AI Clock twister, AI Transaction Booster= All on Auto
CPU VOLT=1.30625 Might be HIGH. My temps are 42-47 IDLE now before the crash it was 36-40.
CPU GTL REF.=Auto
FSB Term VOLT=Auto
CPU PLL VOLT=1.50
NB=1.24 SB=1.10
Load Line Calibration Enabled, CPU Spread and PCI Spectrum=Both are Disabled
CPU Ratio 9.0
FSB Freq 405GHZ
FSB Strap 400
Let me know what needs to be changed and plus if I forgot some other settings. I hope you guys still remember what needs to be done coz I dont. LOL!
Thanks again my peeps at ANANDTECH
Chrissy
C1E, CPU TM Fuction=Both Disabled
Execute Disabled Bit=Enabled
Dram Static Read Control, Dram Read Timing, Mem. OC Charger, AI Clock twister, AI Transaction Booster= All on Auto
CPU VOLT=1.30625 Might be HIGH. My temps are 42-47 IDLE now before the crash it was 36-40.
CPU GTL REF.=Auto
FSB Term VOLT=Auto
CPU PLL VOLT=1.50
NB=1.24 SB=1.10
Load Line Calibration Enabled, CPU Spread and PCI Spectrum=Both are Disabled
CPU Ratio 9.0
FSB Freq 405GHZ
FSB Strap 400
Let me know what needs to be changed and plus if I forgot some other settings. I hope you guys still remember what needs to be done coz I dont. LOL!
Thanks again my peeps at ANANDTECH
Chrissy
Facebook
Twitter