• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

O.K. I got my 1GHz to 1.2 (12x100), now what?

F

forouza1

Senior member
I tried 12.5X100 and I could post but I could startup w2k. My voltage is set in the bios at 1.85. I/O voltage is default 3.3V. Memory settings are Cas2 133Mhz on Crucial memory. I'm running a PCI video card too. I guess I should bump the FSB now but I've heard of also changing setting to 9.5X133 and then change the multiplier from there. I have a KT133 chip so I doubt I can hit past 110 FSB MHz

Any help would be appreciated.

Thanks.

 
you could bump the I/O voltage to 3.45 and see if you can boot windows. i looked at your system and your MB probably won't even come close to 133FSB. it'll probably top out at about 110FSB, but that doesn't mean you shouldn't increase your FSB notch by notch. the turbo version of that MB can do 133FSB.
 
Try 10.5X110 and set the memory to fsb + PCI = 143mhz on the memory 😉 Also lower the core voltage to 1.80 or even 1.75 with the IO voltage at 3.5 (no higher on the IO or scratch the memory)... 🙁
 
You must log in or register to reply here.
Back
Top