O/C'd RAM??? HOW!!

RedCross

Member
Dec 7, 1999
183
0
0
I have a question about o/c'in my ram. I have MUshkin pc133 cas 2 ram and i always hear about "it'll do 155 mhz fsb." Can someone tell me how to do this? i have a kt7 raid mobo if that helps. thanks guys.


-nate
 

Technonut

Diamond Member
Mar 19, 2000
4,041
0
0
You will have to do a combination multiplier/FSB overclock with your RAM set at Host CLK + PCI CLK in the BIOS. For example, I have the multiplier set at 900, the FSB at 105/35 + 4 = 109 . With the RAM at Host CLK + PCI CLK the RAM is at 135MHz + 9 = 144MHz.
 

Wik

Platinum Member
Mar 20, 2000
2,284
0
0
Depends on the chipset. If it your MB uses the old BX chipset ram only runs at the CPU FSB speed.
 

paulip88

Senior member
Aug 15, 2000
908
0
0
But this is a ABIt KT7 RAID, so what technonut said applies to the question at hand.
 

Maximus96

Diamond Member
Nov 9, 2000
5,388
1
0
can't seem to get anything higher than 102 or 103 on the FSB for me...my ram run at 133 cas 2...can't go higher...
 

Wik

Platinum Member
Mar 20, 2000
2,284
0
0
oops didn't see the mobo in his post. My bad for not reading the whole thing. :eek: