Hello,
I had my Duron 600 overclocked to 1060 for about 6 months if not more ...
I installed linux recently , and it was freezing very often ... so I put my cpu to normal speed , but it was freezing anyway , well , I found out that it's video card problem
... I fixed it , and now I wanted to clock my cpu back to 1060 as it was , but I couldn't get multiplier higher than 6.5 ... what can be a problem here ? ... here I made a little chart while overclocking it to 683 :|
Multi FSB/PCI FSB Core I/O
plier Clock Plus V. V.
factor (PCI-33)
6.5 101 3 1.8 3.5 ok
7 101 3 1.8 3.5 no
7 100 0 1.85 3.7 no
6.5 103 3 1.8 3.5 no
6.5 101 5 1.8 3.5 no
6.5 101 4 1.8 3.5 no
6.5 101 3 1.6 3.3 no
6.5 101 3 1.7 3.3 ok
6.5 101 3 1.65 3.3 no
6.5 101 3 1.675 3.3 no
well , I don't know how to make it look right , so these are the columns :
1.)Multiplier factor
2.)FSB/PCI Clock (PCI always = 33)
3.) FSB Plus
4.) Core voltage
5.) I/O Voltage
thanks all
I had my Duron 600 overclocked to 1060 for about 6 months if not more ...
I installed linux recently , and it was freezing very often ... so I put my cpu to normal speed , but it was freezing anyway , well , I found out that it's video card problem
... I fixed it , and now I wanted to clock my cpu back to 1060 as it was , but I couldn't get multiplier higher than 6.5 ... what can be a problem here ? ... here I made a little chart while overclocking it to 683 :|Multi FSB/PCI FSB Core I/O
plier Clock Plus V. V.
factor (PCI-33)
6.5 101 3 1.8 3.5 ok
7 101 3 1.8 3.5 no
7 100 0 1.85 3.7 no
6.5 103 3 1.8 3.5 no
6.5 101 5 1.8 3.5 no
6.5 101 4 1.8 3.5 no
6.5 101 3 1.6 3.3 no
6.5 101 3 1.7 3.3 ok
6.5 101 3 1.65 3.3 no
6.5 101 3 1.675 3.3 no
well , I don't know how to make it look right , so these are the columns :
1.)Multiplier factor
2.)FSB/PCI Clock (PCI always = 33)
3.) FSB Plus
4.) Core voltage
5.) I/O Voltage
thanks all
Facebook
Twitter