O/C AXIA on KT7-R...duh...please remind me

Jeffwo

Platinum Member
Mar 2, 2001
2,759
0
76
I have been running a Duron 600@1000 on this system and now I am moving up
to a 1g. AXIA (bridges unlocked)

Would someone please remind me exactly what I need to do to set this up to run at..
say..1.3

I have 256 of PC133

Also, will a CoolerMaster DP5-5H51 be adequate cooling with this o/c? (I have a Delta
screamer but I DO NOT want to put it back on). I have 6 case fans running too.

Thanks in advance, guys.

Jeff
 

Boonesmi

Lifer
Feb 19, 2001
14,448
1
81
you may or may not need to increase the core voltage (1.75 is default)

set the fsb at 133mhz and set the multiplier at 10x :) not to hard
 

Bimmer318i

Golden Member
Apr 1, 2001
1,375
0
81
Umm, one correction, there isn't much of a chance you are gonna get to 133 mhz fsb, if that is an original KT7-Raid (without the A), look @ a max of say 110-115, if that...
Try setting it to 12.5x 105-7....right around 1.3 (a bit higher)
....
correct me if i'm wrong..
 

Jeffwo

Platinum Member
Mar 2, 2001
2,759
0
76


<< Umm, one correction, there isn't much of a chance you are gonna get to 133 mhz fsb, if that is an original KT7-Raid (without the A), look @ a max of say 110-115, if that...
Try setting it to 12.5x 105-7....right around 1.3 (a bit higher)
....
correct me if i'm wrong..
>>



You, know, that's what I was thinking. I am relatively new to all of this but I thought I could remember that from some where, thus the reason for this post. I do know that I am runnung @ 100fsb X 10.0 right now.

Thanks for posting, we'll see, wont we? BTW it is KT7 w/o the A. And, also, 1.3 is what I was shooting for anyway.

Thanks,
Jeff


 

JustStarting

Diamond Member
Dec 13, 2000
3,135
0
76
Set the multiplier to 12.5 and vcore to 1.775v. KT7 will boot CPU at 1300 (12.5*104). It ups the FSB to 104 on its own and will give you 1300. Many people have reported this and it works on mine.
 

Confused

Elite Member
Nov 13, 2000
14,166
0
0
you can also get the latest BIOS for the board from www.abit.com.tw which has a "12above" multiplier, which is 13. I am running my KT7 with a 1g Axia at 1430MHz (13*110), although some people can not get more than about 105 from the FSB.

ConfusedBW
 

Boonesmi

Lifer
Feb 19, 2001
14,448
1
81
my bad.... i was thinking you had a kt7a

as was said above... the kt133 chipset will rarely run over 110mhz