Shaftatplanetquake
Diamond Member
I've got a geforce 3 ti200[agp] and a matrox millennium g450 dualhea[pci].
I've got a crt(NEC accusync90) and 2 LCDS(both viewsonic VA520).
I'm having a problem where on the LCDS there is about 3/4 an inch of black space (bottom edge is pushed up about 3/4 an inch) and the top of the screen isn't displayed on the lcds(about 3/4 an inch of working room is off the edge of the top of the screen). So basically the displays have been nudged upwards slightly out of the viewable area.
It doesn't matter if I connect the crt in with an LCD on the Matrox and an LCD by itself on the Geforce or if I connect the crt by itself on the geforce and the LCDs together with each other on the matrox.
It doesn't matter if I disconnect one of the lcds completely for that matter and leave just one completely by itself on the matrox. I still have the shifted display for some reason.
The lcds tested fine by themselves on just the Geforce, so they are good.
OS is win2k pro. Matrox can be setup in independent mode or dependent mode, it doesn't matter I still have the shifting on the LCDs.
Anyone ran into this before?
I've got a crt(NEC accusync90) and 2 LCDS(both viewsonic VA520).
I'm having a problem where on the LCDS there is about 3/4 an inch of black space (bottom edge is pushed up about 3/4 an inch) and the top of the screen isn't displayed on the lcds(about 3/4 an inch of working room is off the edge of the top of the screen). So basically the displays have been nudged upwards slightly out of the viewable area.
It doesn't matter if I connect the crt in with an LCD on the Matrox and an LCD by itself on the Geforce or if I connect the crt by itself on the geforce and the LCDs together with each other on the matrox.
It doesn't matter if I disconnect one of the lcds completely for that matter and leave just one completely by itself on the matrox. I still have the shifted display for some reason.
The lcds tested fine by themselves on just the Geforce, so they are good.
OS is win2k pro. Matrox can be setup in independent mode or dependent mode, it doesn't matter I still have the shifting on the LCDs.
Anyone ran into this before?
