• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Nvidia Graphics Card Power Issue

LuNoTiCK

Diamond Member
Whenever I start up the computer I get a pop-up that says

"To protect your hardware from potential damage or causing a potential system lockup, the graphics processor has lowered its performance to a level that allows continued safe operations."

This is a new error message, I never used to get it, I switched the power supply.

The system specs are

Dell XPS 700
Intel Pentium D 930 3Ghz
3GB DDR 2 667Mhz
256MB Nvidia Geforce 7900 GS (Not the most power hungry card)
250GB Sata 7200RPM
16x dvd+-RW

The power supply I changed it to is a new one of this:
http://accessories.us.dell.com/sna/p...s=19&sku=PM480

Is it a motherboard issue? Video card? Drivers?
 
Did you plug a 6-pin power connector into the card? You went a little overboard on the power supply, btw.
 
The driver is responding to a low-power sensor and downclocking your graphics card.

The reason for the sensor detecting low power could be one of many possibilities. When I received this message on an old system, the cause was a fracture in the soldered connection between power socket and PCB. I recommend checking your power cables and connectors.
 
Dell uses proprietary motherboards, 750 and 1000 Watt are all that works. I figured better being safe, at least I KNOW the power supply can handle the load.

I did not plug in a 6 pin connector, I didn't see any on there. Maybe I just missed it?

I reinstalled a power supply, so I wouldn't expect a connectino issue, but maybe in something else? I'll check all the connections.
 
Back
Top