Now that the BUFFALO WHR-HP-G54 is Discontinued, Which Buffalo to Get ?

wwswimming

Banned
Jan 21, 2006
3,695
1
0
I appreciate all of the replies, but I am wondering - there has got to be a replacement for that Buffalo model.

It's not like the industry decided, "we're going to sell clunky high-power routers, sorry the Linksys WRT54GL is the best you can hope for."

Another question - if I use an antenna to improve the router's reception, what should the radius of the spherical surface of the dish be, given that it runs at 2.4 GHz ?

From limited EM education, the focal point of that dish would be either the radius or half the radius. The focal point being, I think, the proper location for the antenna of the radio.

Although since the antenna is attached to the router/ radio, you have to park the router out in front of the antenna to.


I suppose a second question is, is there a good high-power antenna/ router combination, where it has a coax cable or something to run from the antenna down to the router ?
 

JackMDS

Elite Member
Super Moderator
Oct 25, 1999
29,561
431
126
2.4GHz Coax is high in loses.

The common practice is to put the Access Point with the Antenna (if it is outdoor use weather prove box) then run POE Network cable to the AP.



:cool:
 

stevech

Senior member
Jul 18, 2010
203
0
0
2.4GHz Coax is high in loses.

The common practice is to put the Access Point with the Antenna (if it is outdoor use weather prove box) then run POE Network cable to the AP.



:cool:
Or for homes, and where cat5 run is too hard, can use HPNA or MoCA instead, to connect an AP.
 

wwswimming

Banned
Jan 21, 2006
3,695
1
0
Thanks again for the replies, but when it comes to this kind of wireless, I am a beginner.

OK, so AP means "access point". How's that for brainpower ?

But I'm still not clear - what do I buy ?

Cable ?

Antenna ?

Router ? - OK, for router, I can always go with the Linksys WRT54GL.

But, if I have an external antenna, do I need a router with antennas ? I'm not sure if that model Linksys can hookup to an external antenna.
 

JackMDS

Elite Member
Super Moderator
Oct 25, 1999
29,561
431
126
May be if you will explain why you need a new Router, the Wireless environmental conditions, and what it is used for it will be easier to help you.



:cool:
 

wwswimming

Banned
Jan 21, 2006
3,695
1
0
May be if you will explain why you need a new Router, the Wireless environmental conditions, and what it is used for it will be easier to help you.
:cool:

>> why i need a wireless Router - to get Internet access without paying Big $ to the phone company for crappy DSL. Right now, I have a phone-company-compatible DSL modem but no network. I have a wired router, just haven't hooked it up yet.

>> environmental conditions - partly cloudy ? Not sure exactly what this means. No big buildings in the way, home is up a hill about 100 feet from the road. Free wireless is available, but not via line-of-sight.

I would like to subscribe to a local wireless service that charges $30 a month. I can already see their network with my laptop wireless. Normally they charge $300 for the equipment. I would rather buy it that pay their mark-up - if they'll let me get away with it.

If I can make their service work with Magic-Jack, I can ditch the phone company - one of the primary goals. They charge big $ for crappy service.


Also, I would like to learn how to set up the "hops" to extend the free wireless service that's about 2 miles away to my neighborhood. This may not be practical, because it might involve setting up multiple repeaters at neighbors' houses - but I'd still like to learn how to do it.

As far as speed - fast enough to make MagicJack work seamlessly. I have the impression that takes Coax type speeds, 5 Megabits or better.

I don't mind paying some money for network infrastructure, if it will help me cut my monthly phone costs.