• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Not quite up to date on wrapping Christmas presents...

DrPizza

Administrator Elite Member Goat Whisperer
When you use sheet metal for wrapping Christmas presents,

are you supposed to solder, braze, rivet, or use self-tapping screws?
(Bwahahahaha! If I recall correctly, when I was a little kid, it didn't matter what I got. Opening the presents was half the fun. Consider me considerate for extending the joy of opening Christmas gifts as long as possible. :twisted: )
 
Daughter is getting iPhone. It will be at the bottom of a big box. At the top of the box will be this...

51h80+NnBBL._SL500_AA300_.jpg

...an AT&T flip phone from a long time ago, still in the package (I bought 3 years ago when Best Buy had them for $3)

Are we cruel parents? 🙂
 
Daughter is getting iPhone. It will be at the bottom of a big box. At the top of the box will be this...

51h80+NnBBL._SL500_AA300_.jpg

...an AT&T flip phone from a long time ago, still in the package (I bought 3 years ago when Best Buy had them for $3)

Are we cruel parents? 🙂

:biggrin: pure evil
 
Grama use to use butcher paper and clear packing tape. Getting into those presents was often times not worth the effort. Thanks for the memories and the sweaters granny.
 
When you use sheet metal for wrapping Christmas presents,

are you supposed to solder, braze, rivet, or use self-tapping screws?
(Bwahahahaha! If I recall correctly, when I was a little kid, it didn't matter what I got. Opening the presents was half the fun. Consider me considerate for extending the joy of opening Christmas gifts as long as possible. :twisted: )

If you use solder make sure it's lead free. You don't want your kid ending up an ATOT junkie.
 
Hey, finally a good consumer use for a 3D printer. Print the base, set the toy in there, and print rest of the box around the toy. Try to unwrap that, youngster.
 
It's too expensive and potentially dangerous for humans to open their own presents. Clearly, the only viable course of action is to use robot package openers.
 
Hey, finally a good consumer use for a 3D printer. Print the base, set the toy in there, and print rest of the box around the toy. Try to unwrap that, youngster.

Not bad. Not bad at all. I like how you think.

But take it one step further. A box within a box within a box within a box several times over and test at what point his frustration level leads him to doubt there is a present in there at all.

Make it a big, big box, with many box layers. Put just a small (but very valuable) gold, platinum coin or diamond in the innermost box. Or a check for a lot of money. Anything very valuable but small enough to have many layers to the boxes. Have one of the other family members comment: "There's probably nothing in those boxes but more boxes? So cruel! haha"

If he doesn't doubt you, he will be rewarded when he opens the final box. If he gives up, the contents of the final box is yours.

You open it, show it to him, and say: "Perseverance: If you had any, this <insert name of valuable thing> would be yours. But you gave up, so here's a lump of coal and a lesson in determination instead.

And THAT is how you teach your kids to be more than mindless consumers this holiday season.

Thank you, I'll be here all week. Happy Holidays!

P.S. If he doesn't pout, cry, get angry or have some negative emotion, if he laughs it off give him a real good present but not the super valuable thing inside. That's still yours to keep...to try the experiment again some other time hehe.
 
When you use sheet metal for wrapping Christmas presents,

are you supposed to solder, braze, rivet, or use self-tapping screws?
(Bwahahahaha! If I recall correctly, when I was a little kid, it didn't matter what I got. Opening the presents was half the fun. Consider me considerate for extending the joy of opening Christmas gifts as long as possible. :twisted: )

Ha 😀 would love to receive a present like that
 
Daughter is getting iPhone. It will be at the bottom of a big box. At the top of the box will be this...

51h80+NnBBL._SL500_AA300_.jpg

...an AT&T flip phone from a long time ago, still in the package (I bought 3 years ago when Best Buy had them for $3)

Are we cruel parents? 🙂

you must film the reaction
 
Daughter is getting iPhone. It will be at the bottom of a big box. At the top of the box will be this...

51h80+NnBBL._SL500_AA300_.jpg

...an AT&T flip phone from a long time ago, still in the package (I bought 3 years ago when Best Buy had them for $3)

Are we cruel parents? 🙂

Make sure you get a good video of her opening that. Should be very entertaining for years to come. 😀

edit: beaten by master_shake_
 
Daughter is getting iPhone. It will be at the bottom of a big box. At the top of the box will be this...

...an AT&T flip phone from a long time ago, still in the package (I bought 3 years ago when Best Buy had them for $3)

Are we cruel parents? 🙂

Be sure to save the iPhone box. Then later, you can put the flip phone in the iPhone box and give it to someone else. The prank gift that keeps on giving. 🙂

-KeithP
 
http://www.snopes.com/holidays/christmas/pants.asp

Origins: The one present Roy Collette wasn't looking forward to getting for Christmas 1988 was those damned pants. Yet he knew he was in trouble as soon as Pants the flatbed truck bearing a concrete-filled tank off a truck used to deliver ready-mix rolled up. Sure as God made little green apples, those pants had to be in there. And he was going to have to fish them out, else declare his brother-in-law the winner of a rivalry that had then spanned 20 years.

Being the sport he is, brother-in-law Larry Kunkel thoughtfully supplied the services of a crane to hoist the concrete-filled tank off the flatbed.

What's this game, you ask? What was the significance of these pants, and why were two grown men going to such efforts year after year to retrieve them, only to send them off again?

It all began in 1964 when Larry Kunkel's mom gave him a pair of moleskin pants. After wearing them a few times, he found they froze stiff in Minnesota winters and thus wouldn't do. That next Christmas, he wrapped the garment in pretty paper and presented it to his brother-in-law.

Brother-in-law Roy Collette discovered he didn't want them either. He bided his time until the Christmas after, then packaged them up and gave them back to Kunkel. This yearly exchange proceeded amicably until one year Collette twisted the pants tightly and stuffed them into a 3-foot-long, 1-inch wide pipe.

And so the game began. Year after year, as the pants were shuffled back and forth, the brothers strove to make unwrapping them more difficult, perhaps in the hope of ending the tradition. In retaliation for the pipe, Kunkel compressed the pants into a 7-inch square, wrapped them with wire and gave the "bale" to Collette. Not to be


outdone, Collette put the pants into a 2-foot-square crate filled with stones, nailed it shut, banded it with steel and gave the trusty trousers back to Kunkel.

The brothers agreed to end the caper if the trousers were damaged. But they were as careful as they were clever. As the game evolved, so did the rules. Only "legal and moral" methods of wrapping were permitted. Wrapping expenses were kept to a minimum with only junk parts used.

Kunkel next had the pants mounted inside an insulated window that had a 20-year guarantee and shipped them off to Collette.

Collette broke the glass, recovered the trousers, stuffed them into a 5-inch coffee can, which he soldered shut. The can was put in a 5-gallon container filled with concrete and reinforcing rods and given to Kunkel the following Christmas.

Kunkel installed the pants in a 225-pound homemade steel ashtray made from 8-inch steel casings and etched Collette's name on the side. Collette had trouble retrieving the treasured trousers, but succeeded without burning them with a cutting torch.

Collette found a 600-pound safe and hauled it to Viracon Inc. in Owatonna, where the shipping department decorated it with red and green stripes, put the pants inside and welded the safe shut. The safe was then shipped to Kunkel, who was the plant manager for Viracon's outlet in Bensenville.

The pants next turned up in a drab green, 3-foot cube that once was a 1974 Gremlin. A note attached to the 2,000-pound scrunched car advised Collette that the pants were inside the glove compartment.

In 1982 Kunkel faced the problem of retrieving the pants from a tire 8 feet high and 2 feet wide and filled with 6,000 pounds of concrete. On the outside Collette had written, "Have a Goodyear."

In 1983 the pants came back to Collette in a 17.5-foot red rocket ship filled with concrete and weighing 6 tons. Five feet in diameter, with pipes 6 inches in diameter outside running the length of the ship and a launching pad attached to its bottom, the rocket sported a picture of the pants fluttering atop it. Inside the rocket were 15 concrete-filled canisters, one of which housed the pants.

Collette's revenge for the rocket ship was delivered to Kunkel in the form of a 4-ton Rubik's Cube in 1985. The cube was made of concrete that had been baked in a kiln and covered with 2,000 board feet of lumber.

Kunkel "solved the cube," and for 1986 gift-giving repackaged the pants into a station wagon filled with 170 steel generators all welded together. Because the pants have to be retrieved undamaged, Collette was faced with carefully taking apart each component.

News accounts didn't record the form in which the pants were passed in 1987, and their 1988 packaging (concrete-filled tank) was mentioned at the beginning of this page. Sadly, 1989's packaging scheme brought the demise of the much-abused garment.

Collette was inspired to encase the pantaloons in 10,000 pounds of jagged glass that he would then deposit in Kunkel's front yard. "It would have been a great one &#8212; really messy," Kunkel ruefully admitted. The pants were shipped to a friend in Tennessee who managed a glass manufacturing company. While molten glass was being poured over the insulated container that held them, an oversized chunk fractured, transforming the pants into a pile of ashes.

The ashes were deposited into a brass urn and delivered to Kunkel along with this epitaph:
Sorry, Old Man Here lies the Pants. . . An attempt to cast the pants in glass brought about the demise of the pants at last.
The urn now graces the fireplace mantel in Kunkel's home.
Read more at http://www.snopes.com/holidays/christmas/pants.asp#RSd3Xq0fg8DXRePX.99
 
I was unsure as to how to wrap a necklace I bought for my fiance. So I tore off a sheet of aluminum foil and wrapped the necklace up like a sandwich. Put a bow on it and into her stocking it went.
 
Not bad. Not bad at all. I like how you think.

But take it one step further. A box within a box within a box within a box several times over and test at what point his frustration level leads him to doubt there is a present in there at all.

Make it a big, big box, with many box layers. Put just a small (but very valuable) gold, platinum coin or diamond in the innermost box. Or a check for a lot of money. Anything very valuable but small enough to have many layers to the boxes. Have one of the other family members comment: "There's probably nothing in those boxes but more boxes? So cruel! haha"

If he doesn't doubt you, he will be rewarded when he opens the final box. If he gives up, the contents of the final box is yours.

You open it, show it to him, and say: "Perseverance: If you had any, this <insert name of valuable thing> would be yours. But you gave up, so here's a lump of coal and a lesson in determination instead.

Put lumps of coal in all the boxes except for the one with the actual gift
 
Yeah...weld it. You should need a grinder with a cutoff wheel to open presents. Or a plasma cutter but that might ruin what's inside.
 
Back
Top