Norton Ghost 6 Multicast Server - where to find the 3 files to create ghost boot disks?

[PeeluckyDuckee]

I'm trying to create multicast ghost boot disks, but its asking for the 3 files that I don't have.
They're protman.exe, protman.dos, and netbind.com

I try the download from MS' FTP site method, it downloads the DSK3-1.exe file, but when it comes time to creating the disks, it says file not found?? Huh?
So anybody here have those 3 files they can email to me? Or a link? Can't seem to find them.

Thx.
Plucky

 

[PeeluckyDuckee]

^

 

[TomBilliodeaux]

I just went to Google and did a search for netbind and came up with a bunch of stuff (below is a sample).
some is related to Norton.



NetBind: Code
NetBind Source Code. The source code for the NetBind is now available. Click
here to download the source code distribution. ... NetBind Libraries. ...
comet.ctr.columbia.edu/genesis/netbind/code/ - 21k - Cached - Similar pages

NetBind: Dynamic Binding Support for the IXP1200 Network ...
4 downloads of NetBind since December 2001. NetBind
was developed by the Genesis Project ...
comet.ctr.columbia.edu/genesis/netbind/ - 4k - Cached - Similar pages
[ More results from comet.ctr.columbia.edu ]

Error codes for NETBIND.EXE when used with NDIS 2 drivers
... Error codes for NETBIND.EXE when used with NDIS 2 drivers Situation: This document
lists the various errors that can occur when NETBIND executes. Solution: The ...
service1.symantec.com/SUPPORT/ghost.nsf/docid/1998090116540425 - 14k - Cached - Similar pages

Error codes for NETBIND.EXE when used with NDIS 2 drivers
Symantec United States Error codes for NETBIND.EXE when used with NDIS 2 drivers
Situation: This document lists the various errors that can occur when NETBIND ...
service1.symantec.com/SUPPORT/ghost.nsf/pfdocs/1998090116540425 - 9k - Cached - Similar pages
[ More results from service1.symantec.com ]

CALL=NetBind.exe
... CALL=NetBind.exe. ... CALL=C:\Ibmcom\Protocol\Netbind.exe. note: This program has

 

[PeeluckyDuckee]

Found it, thx for the help, but it was just an exe stored in another partition I didn't knew it downloaded to.

 

[PeeluckyDuckee]

Ok, so I went thru the Norton Ghost Multicast assist wizard and created the two boot disks - the Ghost and GhostServer boot disks. So when I try to boot using either disks, all I can get to is the "Starting Windows98..." line then it hangs there forever.

I've set it to assign an ip statically, so it should't be looking for a dchp server. Even if it is it should find it, as I've setup a scope in DCHP as well.
Any ideas fellas?

Plucky